← All OSHA Flashcard Decks

Maintenance Protocols Flashcards

7 cards from real OSHA practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.

Read the first 7 Maintenance Protocols flashcards as text
  1. An operational aid such as the boom angle indicator stops working. What must the employer do while awaiting repair?

    Answer: Use temporary alternative measures specified by OSHA

    OSHA 1926.1416(d) permits continued operation with specified temporary alternative measures while operational aids are being repaired.

  2. Within how many calendar days must a Category I operational aid, like an anti-two-block device, generally be repaired?

    Answer: 7 calendar days

    Category I operational aids must be repaired within 7 calendar days of the deficiency occurring.

  3. Within how many calendar days must a Category II operational aid, such as a boom angle indicator, generally be repaired?

    Answer: 30 calendar days

    Category II operational aids must be repaired within 30 calendar days.

  4. If a required safety device such as a crane level indicator is not working, what is the rule?

    Answer: Operations must not begin or must stop until it is working

    OSHA 1926.1415 prohibits operating equipment if any required safety device is not in proper working order.

  5. Which item is classified by OSHA as a safety device rather than an operational aid?

    Answer: Boom stops

    Boom stops are listed as safety devices under 1926.1415, while the others are operational aids.

  6. Hydraulic outrigger jacks must be equipped with what safety device?

    Answer: An integral holding device or check valve

    OSHA requires an integral holding device or check valve on hydraulic outrigger jacks to prevent collapse.

  7. Before beginning maintenance on a crane, which practice is most appropriate?

    Answer: Lower the load and boom where possible, shut down power, and apply lockout/tagout

    Safe maintenance requires removing loads, securing the boom, de-energizing, and locking/tagging out the equipment.

Written and edited by , founder of Practice Test Geeks, with AI assistance. Exam facts are checked against the official sources linked below. Editorial policy

Sources & references

Exam facts on this page (fees, format, dates, passing scores) are checked against these official sources; the date is our last check. Editorial policy

  1. osha.gov — Score validity · verified Nov 2026
  2. nccco.org — Test delivery, renewal, score release, eligibility, fees, exam format, time limit, score validity · verified Nov 2026