Load Handling & Rigging Techniques Flashcards
7 cards from real OSHA practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.
Read the first 7 Load Handling & Rigging Techniques flashcards as text
Four-leg sling, 20,000 lb load, legs at 45° from horizontal, and only two legs assumed to carry the load. What is the approximate tension per loaded leg?
Answer: 14,140 lb
Each loaded leg carries 10,000 lb × the 45° factor of 1.414, which is about 14,140 lb.
For a rotation-resistant wire rope, what broken-wire count triggers removal under OSHA 1926.1413?
Answer: 2 broken wires within 6 rope diameters or 4 within 30 rope diameters
Rotation-resistant rope has stricter limits, with removal at 2 broken wires in 6 diameters or 4 in 30 diameters.
In a tandem (two-crane) lift, what is the most important planning concern?
Answer: Ensuring neither crane is overloaded as load shares shift during movement
Load distribution changes as the cranes move, so a tandem lift needs a plan and coordinated control to keep each crane within capacity.
When a choker hitch's angle of choke is less than 120°, what happens to the sling's rated capacity?
Answer: It decreases
A sharper choke angle puts more stress on the sling, so its rated capacity must be reduced.
Which is a removal criterion for a wire rope sling?
Answer: Kinking, birdcaging, or crushing
Kinks, birdcaging, and crushing are structural distortions that require removal from service.
What is the best practice for using a screw-pin shackle where the load or sling might rotate the pin?
Answer: Use a bolt-type shackle with nut and cotter pin instead
Rotation can unscrew a screw pin, so a bolt-type shackle with nut and cotter pin is the secure choice.
What is the correct way to use a sling's identification tag before a lift?
Answer: Verify the rated load for the hitch you will use; remove the sling if the tag is missing or illegible
Slings must carry legible rated-load identification, and a sling without it must be taken out of service.
Written and edited by Nathan Beja, founder of Practice Test Geeks, with AI assistance. Exam facts are checked against the official sources linked below. Editorial policy
Sources & references
Exam facts on this page (fees, format, dates, passing scores) are checked against these official sources; the date is our last check. Editorial policy