← All OSHA Flashcard Decks

Load Handling & Rigging Techniques Flashcards

7 cards from real OSHA practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.

Read the first 7 Load Handling & Rigging Techniques flashcards as text
  1. Under OSHA 1926.1425, when may a worker be directly under a suspended load?

    Answer: When hooking, unhooking, or guiding the load, or during initial attachment

    OSHA allows limited exceptions such as hooking, unhooking, guiding, and initial attachment, provided specific conditions are met.

  2. What is the recommended way to confirm the brakes and rigging before a full lift?

    Answer: Raise the load a few inches, then stop and check it

    A trial lift of a few inches confirms that the brakes hold, the load is balanced, and the rigging is seated.

  3. A wire rope sling in a basket hitch is wrapped around a pin whose diameter equals the rope diameter (D/d = 1). What happens to its efficiency?

    Answer: It drops to about 50%

    Very tight bends sharply reduce wire rope strength, and at a D/d of 1:1 efficiency falls to about 50%.

  4. Which chain grades are acceptable for overhead lifting slings?

    Answer: Alloy Grade 80 or 100

    Only alloy chain, such as Grade 80 or 100, is approved for overhead lifting slings.

  5. Which method is acceptable for determining load weight before a lift?

    Answer: Manufacturer data, shipping documents, or calculation

    Load weight must come from a reliable source such as documents, calculations, or a weighing device, never a guess.

  6. When working near energized power lines, what material should a tag line be made of?

    Answer: Nonconductive material

    OSHA requires tag lines near power lines to be nonconductive so they cannot become an electrical path.

  7. Why must the hook latch (safety latch) be closed and working during a lift?

    Answer: To keep slings from slipping out of the hook if they go slack

    The latch keeps the rigging inside the hook throat if tension is momentarily lost.

Written and edited by , founder of Practice Test Geeks, with AI assistance. Exam facts are checked against the official sources linked below. Editorial policy

Sources & references

Exam facts on this page (fees, format, dates, passing scores) are checked against these official sources; the date is our last check. Editorial policy

  1. osha.gov — Score validity · verified Nov 2026
  2. nccco.org — Test delivery, renewal, score release, eligibility, fees, exam format, time limit, score validity · verified Nov 2026