← All OSHA Flashcard Decks

Load Handling & Rigging Techniques Flashcards

7 cards from real OSHA practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.

Read the first 7 Load Handling & Rigging Techniques flashcards as text
  1. A two-leg bridle lifts a 10,000 lb load with each leg at 60° from horizontal. What is the approximate tension in each leg?

    Answer: 5,775 lb

    Each leg carries 5,000 lb × the 60° load angle factor of 1.155, which is about 5,775 lb.

  2. Below what sling angle from horizontal is rigging generally not recommended because leg tension rises sharply?

    Answer: 30°

    At 30° each leg carries twice its share of the load, and below 30° tension climbs very quickly.

  3. Compared with the vertical rated capacity of the same sling, a single-wrap choker hitch typically has about what capacity?

    Answer: 75–80%

    The choke point bends and pinches the sling, so the rating drops to about 75–80% of the vertical capacity.

  4. When attaching wire rope clips to form an eye, where must the U-bolt be placed?

    Answer: On the dead (short) end

    The saddle goes on the live end and the U-bolt on the dead end, which gives the rule "never saddle a dead horse."

  5. A three-leg bridle is rigged to a rigid, irregularly shaped load. For capacity planning, how many legs should be assumed to carry the load?

    Answer: Two

    On a rigid load the legs rarely share the weight equally, so standard practice assumes only two legs carry it.

  6. What is the main purpose of a tag line during a lift?

    Answer: To control load rotation and swing from a safe distance

    Tag lines let workers guide and stabilize the load without standing under it or near pinch points.

  7. Before a lift, the load's center of gravity is found to be off to one side of the hook. What will happen when the load is raised?

    Answer: It will tilt until its center of gravity is directly below the hook

    A freely suspended load always shifts until its center of gravity sits directly below the hook.

Written and edited by , founder of Practice Test Geeks, with AI assistance. Exam facts are checked against the official sources linked below. Editorial policy

Sources & references

Exam facts on this page (fees, format, dates, passing scores) are checked against these official sources; the date is our last check. Editorial policy

  1. osha.gov — Score validity · verified Nov 2026
  2. nccco.org — Test delivery, renewal, score release, eligibility, fees, exam format, time limit, score validity · verified Nov 2026