NEBOSH Work Equipment Safety 2

Question 1

A self-adjusting guard on a circular saw automatically adjusts its opening based on what factor?

Accepted Answer

The size and movement of the workpiece being fed through

Answer

A self-adjusting guard automatically adjusts the size of its opening according to the dimensions of the workpiece being passed through. As the material is fed in, the guard opens just enough to admit it, then returns to its rest position, minimising operator exposure to the dangerous parts.

Question 2

Under LOLER 1998, what documentation must be provided following a thorough examination of lifting equipment?

Accepted Answer

A report of thorough examination by the competent person

Answer

LOLER Regulation 10 requires that a report of thorough examination is produced by the competent person after each examination. This report must identify the equipment, describe any defects found, state whether it is safe to continue use, and specify the next examination date.

Question 3

What is meant by a 'thorough examination scheme' under LOLER 1998?

Accepted Answer

A written scheme drawn up by a competent person specifying which parts of the equipment are to be examined and at what intervals

Answer

A thorough examination scheme is a documented plan prepared by a competent person that identifies the critical parts of lifting equipment requiring examination, the methods of examination, and the intervals between examinations. It may replace the default statutory intervals if appropriately justified.

Question 4

Which of the following lifting accessories must be thoroughly examined under LOLER 1998?

Accepted Answer

All lifting accessories including slings, shackles, eyebolts and hooks

Answer

LOLER 1998 applies to all lifting accessories used at work, including chains, slings (textile, wire rope, chain), shackles, eyebolts, hooks, and swivels. All must undergo thorough examination at least every 6 months as they are critical to the safety of lifting operations.

Question 5

Under PUWER 1998, who is responsible for ensuring that adequate training is provided to workers using work equipment?

Accepted Answer

The employer

Answer

PUWER Regulation 9 places a duty on the employer to ensure that all persons who use, supervise or manage the use of work equipment have received adequate training. This includes training on the methods of use, risks involved, and precautions to be taken.

NEBOSH IGC Practice Test

NEBOSH IGC Practice Test

NEBOSH Work Equipment Safety 2