NEBOSH Work Equipment Safety

Question 1

Under PUWER 1998, what is the primary duty placed on employers regarding the provision of work equipment?

Accepted Answer

Equipment must be suitable for its intended use and conditions

Answer

Equipment must be purchased from approved suppliers only

Answer

Equipment must be replaced every five years regardless of condition

Answer

Equipment must be painted in high-visibility colours

Question 2

Which type of machinery guard is permanently fixed to the machine and can only be removed with tools?

Accepted Answer

Fixed guard

Answer

Interlocked guard

Answer

Adjustable guard

Answer

Self-adjusting guard

Question 3

What does the acronym LOTO stand for in the context of maintenance isolation procedures?

Accepted Answer

Lockout/Tagout

Answer

Limit Of Tolerance Operation

Answer

Level Of Technical Oversight

Answer

Logistics Of Temporary Operations

Question 4

Under LOLER 1998, how often must lifting equipment used for lifting persons undergo thorough examination?

Accepted Answer

Every 6 months

Answer

Every 12 months

Answer

Every 3 months

Answer

Every 24 months

Question 5

What is the key difference between an interlocked guard and a fixed guard on machinery?

Accepted Answer

An interlocked guard is linked to the machine controls so the machine cannot operate unless the guard is closed

Answer

Interlocked guards are cheaper to install

Answer

Fixed guards provide better protection than interlocked guards

Answer

Interlocked guards do not require maintenance

Question 6

Which of the following is a requirement for mobile work equipment under PUWER 1998?

Accepted Answer

The employer must ensure mobile work equipment is fitted with rollover protective structures (ROPS) where there is a risk of rollover

Answer

Mobile equipment must always be fitted with caterpillar tracks

Answer

Mobile equipment can only be operated by workers over 25 years old

Answer

Mobile equipment must be stored indoors at all times