NCCER - National Center for Construction Education and Research Construction Site Safety Basics Questions and Answers 1

Question 1

A worker is tasked with using a chemical solvent to clean some equipment. Before using the product, where should the worker look to find detailed information about the chemical's hazards, handling procedures, and required personal protective equipment?

Accepted Answer

The product's Safety Data Sheet (SDS)

Answer

The Safety Data Sheet (SDS), formerly known as the Material Safety Data Sheet (MSDS), is the primary source of detailed information regarding hazardous chemicals. It is required by OSHA's Hazard Communication Standard and contains critical information on potential hazards, safe handling, and emergency control measures.

Question 2

When setting up a portable extension ladder to access a roof, what is the minimum distance the top of the ladder must extend above the point of support (e.g., the edge of the roof)?

Accepted Answer

3 feet (0.9 meters)

Answer

According to OSHA standards for ladder safety, when a portable ladder is used to access an upper landing surface, the ladder side rails must extend at least 3 feet above the upper landing surface to provide a secure handhold for workers getting on and off the ladder.

Question 3

A personal fall arrest system (PFAS) includes a full-body harness, a lanyard, and an anchor point. For the system to function correctly during a fall, where should the D-ring on the full-body harness be positioned?

Accepted Answer

In the middle of the back, between the shoulder blades

Answer

The D-ring on a full-body harness must be positioned in the center of the worker's back, between the shoulder blades. This placement ensures that in the event of a fall, the forces are distributed evenly across the body and the worker is kept in an upright position.

Question 4

A competent person inspects an excavation daily. In the absence of a soil analysis, which of the following soil types must all excavations be treated as?

Accepted Answer

Type C

Answer

OSHA regulations require that if soil is not classified by a competent person, it must be treated as the most unstable type, which is Type C soil. This is a conservative, safety-first approach to protect workers from cave-ins, as Type C is the most dangerous soil classification.

Question 5

An electrician is about to perform maintenance on a piece of equipment that is hardwired to the building's power. Which of the following procedures is critical to perform to protect the worker from the unexpected release of hazardous energy?

Accepted Answer

Lockout/Tagout (LOTO)

Answer

Lockout/Tagout (LOTO) is a safety procedure used to ensure that dangerous machines are properly shut off and not able to be started up again prior to the completion of maintenance or servicing work. It involves placing a lock and tag on the energy-isolating device, preventing the release of hazardous energy.

NCCER (National Center for Construction Education & Research) Practice Test

NCCER (National Center for Construction Education & Research) Practice Test

NCCER - National Center for Construction Education and Research Construction Site Safety Basics Questions and Answers 1