FREE GPC Glider Operations & Control Techniques Questions and Answers

Question 1

What is the primary purpose of using rudder during a glider turn?

Accepted Answer

To maintain coordinated flight

Answer

To increase the turn rate

Answer

To decrease airspeed

Answer

To activate the spoilers

Question 2

When ridge soaring, what is the optimal position relative to the ridge?

Accepted Answer

Slightly windward of the ridge crest

Answer

Directly above the ridge line

Answer

Several miles downwind of the ridge

Answer

At tree-top level on the lee side

Question 3

What control input should be used to terminate a wing drop during slow flight?

Accepted Answer

Rudder to level wings and reduce back pressure

Answer

Full opposite aileron

Answer

Full forward stick

Answer

Simultaneous spoiler deployment

Question 4

How should the elevator be used during a winch launch?

Accepted Answer

Allow natural pitch-up with minimal input

Answer

Maintain constant back pressure

Answer

Apply full forward stick initially

Answer

Alternate between forward and back pressure

Question 5

What is the correct sequence for entering a thermal?

Accepted Answer

Shallow initial bank, then adjust as needed

Answer

Steep bank immediately, then tighten

Answer

Fly straight through without turning

Answer

Sideslip into the thermal

Question 6

What is the purpose of the 'speed-to-fly' theory?

Accepted Answer

To optimize cruise speed between lift sources

Answer

To calculate maximum altitude

Answer

To determine stall speed

Answer

To comply with airspace regulations

Question 7

How should spoilers be used during final approach?

Accepted Answer

Used progressively to adjust glide path

Answer

Deployed fully throughout approach

Answer

Not used at all during approach

Answer

Pulsed rapidly for steering

Question 8

What is the correct recovery technique for an incipient spin?

Accepted Answer

Neutralize ailerons, opposite rudder, then forward elevator

Answer

Apply full power (if available)

Answer

Pull back firmly on the stick

Answer

Deploy landing gear

Question 9

What is the purpose of performing an 'energy check' on final approach?

Accepted Answer

To assess altitude and airspeed for landing

Answer

To test the radio equipment

Answer

To check battery levels

Answer

To calculate remaining flight time