F80 Regulations and Codes 5

Question 1

Under NYC Fire Code, who is responsible for ensuring a fire alarm system impairment is corrected in a timely manner?

Accepted Answer

The building owner or their authorized representative

Answer

The building owner or their authorized representative is ultimately responsible for ensuring fire alarm system impairments are corrected promptly.

Question 2

According to NFPA 72, what is the maximum allowable voltage drop permitted in a notification appliance circuit under full load?

Accepted Answer

5 volts or 10% of rated voltage (whichever is less)

Answer

NFPA 72 limits notification appliance circuit voltage drop to 5 volts or 10% of rated voltage, whichever is less, to ensure proper device operation.

Question 3

An F80 certificate holder discovers that 10 smoke detectors on the 14th floor are inoperative. What is the FIRST required action?

Accepted Answer

Notify building management and initiate fire watch procedures

Answer

The first required action is to notify building management and initiate fire watch procedures to protect occupants until the system is restored.

Question 4

Per NFPA 72, how must each initiating device circuit be identified on the fire alarm control unit?

Accepted Answer

By a unique zone label indicating the device location

Answer

NFPA 72 requires each initiating device circuit to be identified by a unique zone label that indicates the protected location, enabling rapid emergency response.

Question 5

Under the NYC Administrative Code, how long must fire alarm system records and inspection reports be retained on the premises?

Accepted Answer

3 years

Answer

NYC Administrative Code requires fire alarm system records and inspection reports to be retained on the premises for a minimum of 3 years.

F80 Practice Test

F80 Practice Test

F80 Regulations and Codes 5