F80 Regulations and Codes 5

Question 1

Under NYC Fire Code, who is responsible for ensuring a fire alarm system impairment is corrected in a timely manner?

Accepted Answer

The building owner or their authorized representative

Answer

The FDNY inspector

Answer

The F80 certificate holder

Answer

The alarm company technician

Question 2

According to NFPA 72, what is the maximum allowable voltage drop permitted in a notification appliance circuit under full load?

Accepted Answer

5 volts or 10% of rated voltage (whichever is less)

Answer

3 volts

Answer

15% of rated voltage

Answer

No specific limit is set

Question 3

An F80 certificate holder discovers that 10 smoke detectors on the 14th floor are inoperative. What is the FIRST required action?

Accepted Answer

Notify building management and initiate fire watch procedures

Answer

Replace the detectors immediately

Answer

Call the alarm company and wait for repair

Answer

Post signs warning occupants

Question 4

Per NFPA 72, how must each initiating device circuit be identified on the fire alarm control unit?

Accepted Answer

By a unique zone label indicating the device location

Answer

By manufacturer serial number only

Answer

By the installation date

Answer

By the installer's license number

Question 5

Under the NYC Administrative Code, how long must fire alarm system records and inspection reports be retained on the premises?

Accepted Answer

3 years

Answer

1 year

Answer

5 years

Answer

10 years

Question 6

Which NFPA 72 chapter specifically addresses the requirements for emergency communications systems (ECS) such as mass notification?

Accepted Answer

Chapter 24

Answer

Chapter 10

Answer

Chapter 17

Answer

Chapter 29

Question 7

Under NFPA 72, a duct smoke detector must be installed in the supply air system of an HVAC unit when the unit serves an area exceeding what square footage?

Accepted Answer

2,000 sq ft

Answer

1,000 sq ft

Answer

5,000 sq ft

Answer

15,000 sq ft