F80 Equipment Operation 5

Question 1

Before entering a trailer to unload freight, an operator should verify:

Accepted Answer

That the trailer is properly chocked or restrained and the landing gear is down

Answer

Trailer creep or separation from the dock while a forklift is inside can cause the truck to fall into the gap, so wheel chocks or trailer restraints are mandatory.

Question 2

How does driving over a floor drain or uneven surface affect forklift stability?

Accepted Answer

It can momentarily shift the center of gravity and increase tip-over risk

Answer

Uneven surfaces cause the frame to flex and can shift the combined center of gravity outside the stability triangle, especially with elevated or off-center loads.

Question 3

An operator is asked to use a forklift to elevate a worker on an elevated work platform. What is required?

Accepted Answer

An approved work platform with guardrails must be used and the forklift must be attended at all times

Answer

OSHA requires an approved, properly secured personnel platform with guardrails, and the operator must remain at the controls whenever a worker is elevated.

Question 4

What should an operator do if they find a spill of unknown liquid on the warehouse floor?

Accepted Answer

Avoid the area, report it, and wait for it to be cleaned up before resuming work in that zone

Answer

Unknown spills may be flammable or slippery, creating both fire and tip-over hazards; the area must be avoided and reported immediately.

Question 5

Why should a forklift operator never make a sharp turn at high speed?

Accepted Answer

High-speed turns can cause the forklift to tip over laterally

Answer

High-speed turns create centrifugal force that can push the center of gravity outside the stability triangle, causing a side tip-over.

F80 Practice Test

F80 Practice Test

F80 Equipment Operation 5