F80 Equipment Operation 5

Question 1

Before entering a trailer to unload freight, an operator should verify:

Accepted Answer

That the trailer is properly chocked or restrained and the landing gear is down

Answer

That the trailer lights are functioning

Answer

That the truck cab is unlocked for emergency access

Answer

That the trailer seal number matches the bill of lading

Question 2

How does driving over a floor drain or uneven surface affect forklift stability?

Accepted Answer

It can momentarily shift the center of gravity and increase tip-over risk

Answer

It has no effect if the load is within rated capacity

Answer

Only affects electric forklifts due to battery weight

Answer

Reduces stability only if traveling faster than 5 mph

Question 3

An operator is asked to use a forklift to elevate a worker on an elevated work platform. What is required?

Accepted Answer

An approved work platform with guardrails must be used and the forklift must be attended at all times

Answer

The worker must wear a hard hat only

Answer

The platform can be improvised from pallets if secured with straps

Answer

The worker must sign a liability waiver before being elevated

Question 4

What should an operator do if they find a spill of unknown liquid on the warehouse floor?

Accepted Answer

Avoid the area, report it, and wait for it to be cleaned up before resuming work in that zone

Answer

Drive through it carefully at reduced speed

Answer

Spread dry absorbent material and continue working

Answer

Notify a supervisor after completing the current task

Question 5

Why should a forklift operator never make a sharp turn at high speed?

Accepted Answer

High-speed turns can cause the forklift to tip over laterally

Answer

It causes excessive tire wear on the drive wheels

Answer

It damages the steering cylinder seals

Answer

Sharp turns are prohibited by most insurance policies

Question 6

What is the primary risk when traveling with forks elevated too high?

Accepted Answer

Raised center of gravity that greatly increases tip-over risk

Answer

Increased fuel consumption due to hydraulic load

Answer

Reduced braking effectiveness on the front wheels

Answer

Damage to the mast chain from extended travel time

Question 7

When a forklift is left unattended, the operator must:

Accepted Answer

Lower the forks, apply the parking brake, and remove the key or disconnect the battery

Answer

Leave the key in the ignition for the next operator

Answer

Set the parking brake only if parked on an incline

Answer

Leave the engine running if returning within 5 minutes