F Equipment and Systems 2

Question 1

What type of fire extinguisher is most commonly found in places of assembly?

Accepted Answer

ABC multi-purpose dry chemical

Answer

ABC multi-purpose dry chemical extinguishers are the most common in places of assembly because they can handle ordinary combustibles (A), flammable liquids (B), and electrical fires (C).

Question 2

The acronym PASS describes the proper use of a fire extinguisher. What does it stand for?

Accepted Answer

Pull, Aim, Squeeze, Sweep

Answer

PASS stands for Pull the pin, Aim at the base of the fire, Squeeze the handle, and Sweep from side to side. This is the universally taught method for extinguisher use.

Question 3

How far away should you stand when using a fire extinguisher?

Accepted Answer

6-8 feet

Answer

Stand approximately 6-8 feet away from the fire when using an extinguisher. This distance provides effective agent delivery while maintaining a safe distance from heat and flames.

Question 4

What should a fire guard check when inspecting a fire extinguisher?

Accepted Answer

Pressure gauge in green zone, seal intact, no visible damage, accessible

Answer

Inspection includes checking the pressure gauge (green zone), ensuring the safety seal is intact, looking for physical damage, verifying accessibility, and confirming the inspection tag is current.

Question 5

What is the purpose of a standpipe system in a place of assembly?

Accepted Answer

To supply water to firefighters on upper floors through hose connections

Answer

Standpipe systems are fixed water supply systems with hose connections on each floor, allowing firefighters to connect hoses and fight fires on upper floors without running hoses up stairways.

(F-03) Fire Guard F-03 Practice Test

(F-03) Fire Guard F-03 Practice Test

F Equipment and Systems 2