F-02 Fire Prevention 2

Question 1

Under NYC Fire Code, what is the maximum allowable gap under a fire door to maintain its fire-resistance rating?

Accepted Answer

3/4 inch

Answer

A gap of up to 3/4 inch under a fire door is permitted while still maintaining the door's fire-resistance rating.

Question 2

A Fireguard notices combustible materials stored within 18 inches of a sprinkler head. What action should be taken?

Accepted Answer

Immediately remove or relocate the materials

Answer

Materials must be kept at least 18 inches below sprinkler heads to ensure the spray pattern is not obstructed; the Fireguard must immediately correct the violation.

Question 3

Which of the following best describes a 'hot work' operation that requires a Fireguard permit in New York City?

Accepted Answer

Performing welding or torch-cutting on a rooftop

Answer

Welding, torch-cutting, and similar operations that produce open flame or sparks constitute hot work requiring a Fireguard permit under NYC Fire Code.

Question 4

How often must a Fireguard conduct fire prevention inspections of the premises during an assigned shift?

Accepted Answer

Every two hours or as directed by the Certificate of Fitness

Answer

Fireguards must patrol and inspect the premises at intervals not exceeding two hours, or more frequently as specified on their Certificate of Fitness.

Question 5

What is the primary purpose of posting a 'No Smoking' sign in a hazardous area?

Accepted Answer

To eliminate an ignition source near flammable materials

Answer

No Smoking signs eliminate a key ignition source (open flame or lit tobacco) from areas where flammable or combustible materials are present.

(F-02) Fireguard Practice Test Practice Test

(F-02) Fireguard Practice Test Practice Test

F-02 Fire Prevention 2