F-02 Basic 3

Question 1

Under what circumstance is a fireguard permitted to leave their assigned post before their shift ends?

Accepted Answer

When relieved by a qualified replacement fireguard

Answer

A fireguard must remain on duty until formally relieved by a qualified replacement to ensure continuous fire watch coverage.

Question 2

What does the term 'means of egress' refer to in fire safety?

Accepted Answer

The continuous, unobstructed path from any point in a building to a public way

Answer

Means of egress is the complete, unobstructed travel path—including exit access, exit, and exit discharge—that occupants use to escape a building.

Question 3

Which of the following best describes a 'hot work' operation that a fireguard may be assigned to monitor?

Accepted Answer

Welding, cutting, or grinding that produces sparks or open flames

Answer

Hot work refers to operations involving open flames or sparks—such as welding, torch cutting, or grinding—that can ignite surrounding materials.

Question 4

A fireguard assigned to a place of assembly notices that the maximum occupancy sign has been removed. What should they do?

Accepted Answer

Report the missing sign to the appropriate authority and document it

Answer

Missing or removed occupancy placards must be reported and documented, as they are required by code to prevent dangerous overcrowding.

Question 5

When checking a self-closing fire door, which condition indicates it is functioning properly?

Accepted Answer

The door closes completely and latches on its own after being opened

Answer

A properly functioning self-closing fire door returns fully to the closed and latched position without assistance, preventing fire and smoke spread.

(F-02) Fireguard Practice Test Practice Test