F-02 F-02 Evacuation Procedures and Exit Requirements 1

Question 1

What is the primary responsibility of a fireguard during a building evacuation?

Accepted Answer

Direct occupants to the nearest available exit

Answer

The fireguard's primary role during evacuation is to immediately direct occupants safely to the nearest available exit.

Question 2

Under NYC fire code, when must exit doors remain unlocked in a place of assembly?

Accepted Answer

Whenever the premises are occupied

Answer

Exit doors must remain unlocked whenever the premises are occupied to ensure safe egress in any emergency.

Question 3

What does the term 'means of egress' refer to in fire code?

Accepted Answer

The complete path of travel from any point in a building to a public way

Answer

Means of egress is the complete path of travel from any point in a building to a public way, including corridors, stairwells, and exit doors.

Question 4

How should a fireguard respond when an exit is found obstructed during a fire event?

Accepted Answer

Redirect occupants to alternate exits and report the obstruction to FDNY

Answer

If an exit is obstructed, the fireguard must immediately redirect occupants to alternate exits and report the blocked exit to responding FDNY units.

Question 5

What is the minimum width required for an exit door in a NYC place of assembly?

Accepted Answer

36 inches

Answer

Under NYC fire code, exit doors in places of assembly must be at least 36 inches wide to allow adequate flow of occupants during evacuation.

(F-02) Fireguard Practice Test