CSWP Advanced Feature Modification 2

Question 1

When using the 'Edit Feature' command on a Loft feature in SolidWorks, which aspect can you modify directly without rebuilding the entire feature from scratch?

Accepted Answer

Guide curve selections and their tangency options

Answer

Within Edit Feature for a Loft, you can modify guide curve selections and tangency conditions directly in the PropertyManager.

Question 2

A Dome feature applied to a flat rectangular face produces an unexpected result. Which parameter should you adjust to control the height of the dome relative to the face?

Accepted Answer

The distance value in the Dome PropertyManager

Answer

The Distance parameter in the Dome PropertyManager directly controls how tall the dome protrudes from the selected face.

Question 3

You need to change the termination condition of an Extruded Boss from 'Blind' to 'Up to Surface'. What is the correct sequence?

Accepted Answer

Right-click the feature and choose Edit Feature, then change the end condition dropdown

Answer

Right-clicking the feature and selecting Edit Feature opens the PropertyManager where the end condition can be changed from Blind to Up to Surface.

Question 4

When editing a Fillet feature that references an edge that has since been deleted, SolidWorks will typically display which error state?

Accepted Answer

A dangling reference error shown in the FeatureManager with a warning symbol

Answer

Deleted reference edges cause a dangling reference error flagged with a warning symbol in the FeatureManager, requiring manual repair.

Question 5

You want to modify the helix pitch of a Sweep feature that uses a helix as its path. What is the correct approach?

Accepted Answer

Edit the helix sketch and update the pitch parameter in the Helix/Spiral PropertyManager

Answer

The helix pitch is defined in the Helix/Spiral feature, which must be edited separately from the Sweep feature that references it.

(CSWP) Certified Solidworks Professional Practice Test

(CSWP) Certified Solidworks Professional Practice Test

CSWP Advanced Feature Modification 2