CSWP Advanced Feature Modification — Questions and Answers

Question 1: When using the 'Edit Feature' command on a Loft feature in SolidWorks, which aspect can you modify directly without rebuilding the entire feature from scratch?

The sketch planes of existing profiles
Guide curve selections and their tangency options (Correct answer)
The number of profiles by adding new sketches externally
The material assigned to the lofted body

Correct answer: Guide curve selections and their tangency options

Within Edit Feature for a Loft, you can modify guide curve selections and tangency conditions directly in the PropertyManager.

Question 2: A Dome feature applied to a flat rectangular face produces an unexpected result. Which parameter should you adjust to control the height of the dome relative to the face?

The radius of the sketch circle
The distance value in the Dome PropertyManager (Correct answer)
The offset surface distance
The draft angle applied to adjacent faces

Correct answer: The distance value in the Dome PropertyManager

The Distance parameter in the Dome PropertyManager directly controls how tall the dome protrudes from the selected face.

Question 3: You need to change the termination condition of an Extruded Boss from 'Blind' to 'Up to Surface'. What is the correct sequence?

Delete the feature and recreate it with the new end condition
Right-click the feature and choose Edit Feature, then change the end condition dropdown (Correct answer)
Use the Move/Copy Bodies tool to reposition the body
Edit the parent sketch and add a coincident relation to the target surface

Correct answer: Right-click the feature and choose Edit Feature, then change the end condition dropdown

Right-clicking the feature and selecting Edit Feature opens the PropertyManager where the end condition can be changed from Blind to Up to Surface.

Question 4: When editing a Fillet feature that references an edge that has since been deleted, SolidWorks will typically display which error state?

The fillet silently removes itself with no warning
A dangling reference error shown in the FeatureManager with a warning symbol (Correct answer)
The model reverts to before the fillet was added
SolidWorks automatically selects the nearest available edge

Correct answer: A dangling reference error shown in the FeatureManager with a warning symbol

Deleted reference edges cause a dangling reference error flagged with a warning symbol in the FeatureManager, requiring manual repair.

Question 5: You want to modify the helix pitch of a Sweep feature that uses a helix as its path. What is the correct approach?

Edit the Sweep feature directly and change the pitch in its PropertyManager
Edit the helix sketch and update the pitch parameter in the Helix/Spiral PropertyManager (Correct answer)
Use the Scale feature to compress the helix height
Modify the sweep profile to compensate for the incorrect pitch

Correct answer: Edit the helix sketch and update the pitch parameter in the Helix/Spiral PropertyManager

The helix pitch is defined in the Helix/Spiral feature, which must be edited separately from the Sweep feature that references it.

Question 6: Which technique allows you to change the seed feature of a Linear Pattern without deleting and recreating the pattern?

Drag the seed feature icon onto the pattern in the FeatureManager
Edit the Linear Pattern feature and reselect the features to pattern (Correct answer)
Use the Replace Feature tool from the Insert menu
Suppress the current pattern and create a new one with the correct seed

Correct answer: Edit the Linear Pattern feature and reselect the features to pattern

Editing the Linear Pattern feature opens its PropertyManager, where you can change the selection under 'Features to Pattern' to a new seed feature.

Question 7: When modifying a Shell feature, increasing the shell thickness causes interference with internal features. What is the most efficient correction?

Delete all internal features and re-add them after resizing the shell
Reorder internal features below the Shell in the FeatureManager so they are applied after shelling (Correct answer)
Increase the overall model size to accommodate the new thickness
Convert the shell to a surface and manually thicken it

Correct answer: Reorder internal features below the Shell in the FeatureManager so they are applied after shelling

Moving internal features below the Shell in the FeatureManager ensures they are cut or added after the shelling operation, preventing interference.

Question 8: You need to change a Mirror feature so it mirrors across a different reference plane. Which step is required?

Delete the mirror and recreate it using the new plane
Edit the Mirror feature and reselect the mirror plane in the PropertyManager (Correct answer)
Rotate the original features and let the mirror update automatically
Use the Move/Copy Bodies command to relocate the mirrored geometry

Correct answer: Edit the Mirror feature and reselect the mirror plane in the PropertyManager

Editing the Mirror feature allows you to reselect the mirror plane reference without deleting and recreating the feature.

Question 9: A Chamfer feature applied to a specific edge needs its angle changed from 45° to 30°. After editing, what additional check is recommended?

Verify that no downstream features reference the chamfered edge with dimension relations (Correct answer)
Rebuild the entire part from scratch to confirm no topology errors
Change the chamfer type from Angle-Distance to Distance-Distance
Run Interference Detection between the chamfer and adjacent bodies

Correct answer: Verify that no downstream features reference the chamfered edge with dimension relations

Changing the chamfer angle modifies edge geometry, which can break references in downstream sketches or features that dimensioned to that edge.

Question 10: When you use 'Edit Sketch' on a sketch that drives a Revolve feature, which change could cause the revolve to fail?

Adding a centerline to the sketch
Crossing the sketch profile over the axis of revolution (Correct answer)
Changing a horizontal dimension value
Adding a construction circle inside the profile

Correct answer: Crossing the sketch profile over the axis of revolution

A Revolve feature requires its profile to be entirely on one side of the axis; crossing the axis creates an invalid self-intersecting solid and fails the feature.

Question 11: You want to modify the instances of a Circular Pattern to skip specific occurrences. Which option in the Circular Pattern PropertyManager enables this?

Equal Spacing toggle
Instances to Skip selection box (Correct answer)
Pattern Seed Only checkbox
Geometry Pattern option

Correct answer: Instances to Skip selection box

The 'Instances to Skip' field in the Circular Pattern PropertyManager lets you select specific instances in the graphics area to omit from the pattern.

Question 12: Which FeatureManager technique lets you view and edit the suppression state of a feature's individual instances in a pattern?

Expanding the pattern feature node in the FeatureManager to reveal individual instances (Correct answer)
Using the Pattern Driven Component Pattern tool
Editing the pattern's sketch with suppression constraints
Running the Design Checker on pattern instances

Correct answer: Expanding the pattern feature node in the FeatureManager to reveal individual instances

Expanding a pattern feature in the FeatureManager reveals individual instances that can each be independently suppressed or unsuppressed.

Question 13: A Wrap feature using the 'Scribe' method needs to be changed to 'Emboss'. How do you make this change?

Delete the Wrap and recreate it with Emboss selected
Edit the Wrap feature and switch the method radio button in the PropertyManager (Correct answer)
Convert the scribed surface to a solid using Thicken
Redefine the source sketch as a 3D sketch

Correct answer: Edit the Wrap feature and switch the method radio button in the PropertyManager

Editing the Wrap feature opens its PropertyManager where the Scribe/Emboss/Deboss method selection can be changed directly.

Question 14: When modifying a Rib feature's thickness, which direction option controls whether material is added symmetrically or only to one side of the rib sketch?

Draft angle setting
Flip Material Side checkbox or Both Sides toggle (Correct answer)
Normal to Sketch option
Reference geometry plane selection

Correct answer: Flip Material Side checkbox or Both Sides toggle

The 'Flip Material Side' checkbox and 'Both Sides' option in the Rib PropertyManager control whether thickness is applied to one or both sides of the sketch plane.

Question 15: You modify the depth of a Blind Extruded Cut and notice downstream features become misaligned. What is most likely the root cause?

The extrude depth exceeds the part bounding box
Downstream features reference faces or edges that shifted position due to the depth change (Correct answer)
The cut feature converted from a cut to a boss automatically
The sketch was over-defined after the modification

Correct answer: Downstream features reference faces or edges that shifted position due to the depth change

Downstream features that reference geometry created by the cut (such as face positions) break or shift when the cut depth changes the position of those faces.

Question 16: Which SolidWorks tool is specifically designed to help repair dangling sketch relations after modifying upstream geometry?

Design Checker
SketchXpert (Correct answer)
FeatureXpert
Check Entity tool

Correct answer: SketchXpert

SketchXpert diagnoses and helps repair dangling or conflicting sketch relations that arise after geometry changes break their references.

Question 17: When editing a Boundary Surface feature, which additional option compared to a Loft provides directional control for each profile?

Curvature To Face tangency applied per-curve, not just at endpoints (Correct answer)
Centerline parameter for profile alignment
Twist control along the path
Merge tangent faces at endpoints

Correct answer: Curvature To Face tangency applied per-curve, not just at endpoints

Boundary Surface allows per-curve directional control including curvature-to-face tangency for each profile and guide curve, offering finer control than Loft.

Question 18: You want to change a Filled Surface feature so it enforces curvature continuity (G2) with adjacent faces instead of tangent (G1). Where do you make this change?

In the parent solid body's material settings
In the Constraint Curves section of the Filled Surface PropertyManager, setting Contact Type to Curvature (Correct answer)
By adding a Curvature Continuous Fillet after the filled surface
In the Fillet feature chained to the filled surface

Correct answer: In the Constraint Curves section of the Filled Surface PropertyManager, setting Contact Type to Curvature

The Constraint Curves section of the Filled Surface PropertyManager includes a Contact Type option where you can select Curvature to enforce G2 continuity.

Question 19: After modifying a Flex feature's bending angle, which display mode helps verify the deformed shape is geometrically correct before rebuilding all downstream features?

Shaded With Edges mode with Real View enabled
Dynamic highlight mode in wireframe
Zebra Stripes or Curvature analysis on the flexed surfaces (Correct answer)
Section View through the bending axis

Correct answer: Zebra Stripes or Curvature analysis on the flexed surfaces

Zebra Stripes or Curvature analysis visualize surface quality and continuity on the flexed result, revealing kinks or unintended discontinuities from the bend angle change.

Question 20: A Hole Wizard hole needs its standard changed from ANSI Inch to ISO. What is the consequence of this change on the hole geometry?

Only the annotation updates; the hole geometry stays the same
The diameter and depth change to match the ISO standard's specifications for the chosen size (Correct answer)
The hole converts from a counterbore to a countersink automatically
The Hole Wizard prohibits changing standards on existing holes

Correct answer: The diameter and depth change to match the ISO standard's specifications for the chosen size

Changing the standard in Hole Wizard updates the actual hole dimensions (diameter, depth, counterbore/countersink values) to match the ISO specification for the selected size.

Question 21: Which FeatureManager drag operation allows you to restructure a feature so it is absorbed into a different body in a multibody part?

Drag the feature above the Split feature that created the second body (Correct answer)
Use Insert > Feature > Move to Body command
Drag the feature into the Solid Bodies folder of the target body
Right-click and choose 'Assign to Body'

Correct answer: Drag the feature above the Split feature that created the second body

Dragging a feature above the Split or operation that created separate bodies changes which body the feature is applied to, as features act sequentially in the FeatureManager.

CSWP Advanced Feature Modification

When using the 'Edit Feature' command on a Loft feature in SolidWorks, which aspect can you modify directly without rebuilding the entire feature from scratch?

🃏 CSWP Flashcards — Study This Quiz as Flip Cards →

📚 Want to go deeper? Read the Full CSWP Study Guide →

What Practice Test Geeks adds beyond an AI chat for CSWP

An AI chatbot can quiz you, but it can't reproduce the exam conditions or keep your record. Here you get:

A timed, full-length CSWP mock exam — 30 questions in 200 minutes with a 75% pass mark, modeled on the official exam's question count and time limit, followed by a score report broken down by exam domain.
A fixed CSWP question bank: the same test every attempt, so your score is comparable from one try to the next instead of changing with every regenerated quiz.
Progress saved on your device: completed tests, scores and missed questions stay in My Progress, so you can retake only what you got wrong.
A printable CSWP cheat sheet you can print or save as a PDF.
CSWP flashcards built from the same question bank.

Start the Timed CSWP Mock Exam →

These practice questions were written with AI tools. They are not real exam questions. Exam facts are checked against the official sources listed below. Not reviewed by a subject-matter expert. Editorial policy

Sources & references

Exam facts on this page (fees, format, dates, passing scores) are checked against these official sources; the date is our last check. Editorial policy

solidworks.com — Test delivery, eligibility, exam format, passing score, retake policy, time limit, score validity · verified Oct 2026