CSWP CSWP - Certified Solidworks Professional Loft Sweep and Advanced Part Features 1 — Questions and Answers
Question 1: In a SolidWorks Sweep feature, what is the required minimum input?
- A profile sketch and a path sketch (Correct answer)
- Two profiles and a guide curve
- A profile and a centerline only
- Three cross-section sketches
Correct answer: A profile sketch and a path sketch
A Sweep requires at minimum one closed profile sketch and one path sketch along which the profile is extruded.
Question 2: What is the primary difference between a Loft and a Sweep feature in SolidWorks?
- A Loft blends between multiple profiles while a Sweep extrudes one profile along a path (Correct answer)
- A Loft uses a path while a Sweep uses multiple profiles
- A Loft is only for surfaces while a Sweep is for solids
- There is no functional difference
Correct answer: A Loft blends between multiple profiles while a Sweep extrudes one profile along a path
A Loft transitions between two or more profile sketches at different planes, while a Sweep moves a single profile along a defined path.
Question 3: In a SolidWorks Loft, what is the purpose of guide curves?
- To control the shape of the loft between profiles (Correct answer)
- To define the start and end profiles
- To set the draft angle of the loft walls
- To specify the loft centerline
Correct answer: To control the shape of the loft between profiles
Guide curves pass through matching points on each profile and constrain the loft boundary shape between sections.
Question 4: Which option in the Sweep feature ensures the profile remains oriented consistently relative to the sweep path?
- Follow Path (Correct answer)
- Keep Normal Constant
- Twist Along Path
- Align with End Face
Correct answer: Follow Path
The 'Follow Path' orientation option keeps the profile perpendicular to the path tangent as it sweeps, maintaining consistent orientation.
Question 5: What constraint must guide curves in a Loft feature satisfy?
- They must pass through a point on each profile (Correct answer)
- They must be parallel to the loft direction
- They must be sketched on the same plane as a profile
- They must be straight lines only
Correct answer: They must pass through a point on each profile
Guide curves must pierce or be coincident with a vertex or point on each loft profile to properly constrain the loft shape.
Question 6: Which SolidWorks feature would you use to create a helical spring shape?
- Sweep with a helix path (Correct answer)
- Loft between circular profiles
- Revolve with offset profile
- Extruded Boss with draft
Correct answer: Sweep with a helix path
A helical spring is created by sweeping a circular profile along a helix/spiral curve defined by the Helix and Spiral tool.
CSWP CSWP - Certified Solidworks Professional Loft Sweep and Advanced Part Features 1
In a SolidWorks Sweep feature, what is the required minimum input?