CSWP CSWP - Certified Solidworks Professional Loft Sweep and Advanced Part Features 2

Question 1

In SolidWorks, what does a 'Dome' feature do?

Accepted Answer

Creates a dome-shaped protrusion on a flat or curved face

Answer

The Dome feature adds a smooth convex or concave bulge to a selected flat or non-planar face of a solid body.

Question 2

What is the purpose of the 'Indent' feature in SolidWorks?

Accepted Answer

Creates a cavity in one body by using another body as a tool

Answer

The Indent feature uses one solid body as a tool to press a matching cavity or protrusion shape into a target body.

Question 3

Which feature in SolidWorks is used to create a tapered extrusion where the walls angle inward or outward?

Accepted Answer

All of the above are valid methods

Answer

Draft can be applied during an extrusion via the Draft option, or added afterward using the Draft feature, or achieved through a Loft — all produce tapered walls.

Question 4

In a SolidWorks Loft, what does the 'Centerline Parameters' option allow you to do?

Accepted Answer

Use a centerline curve to guide the overall loft axis direction

Answer

The Centerline Parameters option uses a selected curve to control the loft's central axis, influencing how profiles are interpolated along the path.

Question 5

What is a 'Boundary Boss/Base' feature in SolidWorks?

Accepted Answer

A feature that creates a solid between profiles in two directions using boundary curves

Answer

Boundary Boss/Base creates a solid by blending profiles defined in two perpendicular directions, providing more control than a standard Loft.

(CSWP) Certified Solidworks Professional Practice Test

(CSWP) Certified Solidworks Professional Practice Test

CSWP CSWP - Certified Solidworks Professional Loft Sweep and Advanced Part Features 2