CSWP CSWP - Certified Solidworks Professional Loft Sweep and Advanced Part Features 2 — Questions and Answers
Question 1: In SolidWorks, what does a 'Dome' feature do?
- Creates a dome-shaped protrusion on a flat or curved face (Correct answer)
- Creates a hemispherical cut into a solid
- Rounds all edges of a selected face
- Adds a spherical boss to an existing body
Correct answer: Creates a dome-shaped protrusion on a flat or curved face
The Dome feature adds a smooth convex or concave bulge to a selected flat or non-planar face of a solid body.
Question 2: What is the purpose of the 'Indent' feature in SolidWorks?
- Creates a cavity in one body by using another body as a tool (Correct answer)
- Adds a raised embossed shape to a face
- Creates a circular pocket with a flat bottom
- Mirrors a cut feature about a plane
Correct answer: Creates a cavity in one body by using another body as a tool
The Indent feature uses one solid body as a tool to press a matching cavity or protrusion shape into a target body.
Question 3: Which feature in SolidWorks is used to create a tapered extrusion where the walls angle inward or outward?
- Extruded Boss with Draft
- Draft feature applied after extrusion
- Loft with angled profiles
- All of the above are valid methods (Correct answer)
Correct answer: All of the above are valid methods
Draft can be applied during an extrusion via the Draft option, or added afterward using the Draft feature, or achieved through a Loft — all produce tapered walls.
Question 4: In a SolidWorks Loft, what does the 'Centerline Parameters' option allow you to do?
- Use a centerline curve to guide the overall loft axis direction (Correct answer)
- Set the loft center of mass
- Define the midpoint profile location
- Align profile sketches to a common center
Correct answer: Use a centerline curve to guide the overall loft axis direction
The Centerline Parameters option uses a selected curve to control the loft's central axis, influencing how profiles are interpolated along the path.
Question 5: What is a 'Boundary Boss/Base' feature in SolidWorks?
- A feature that creates a solid between profiles in two directions using boundary curves (Correct answer)
- A feature identical to Loft but with different UI
- A feature that fills a gap between two solid bodies
- An advanced extrude that respects part boundaries
Correct answer: A feature that creates a solid between profiles in two directions using boundary curves
Boundary Boss/Base creates a solid by blending profiles defined in two perpendicular directions, providing more control than a standard Loft.
Question 6: When using the Sweep feature with a Pierce relation, where should the path pierce the profile sketch plane?
- Through the profile sketch entity to link the path endpoint to the profile (Correct answer)
- At the origin of the part
- Outside the profile boundary
- At the profile's center of mass
Correct answer: Through the profile sketch entity to link the path endpoint to the profile
A Pierce relation constrains the path curve to pass through (pierce) a specific point on the profile sketch, ensuring the profile follows the path correctly.
CSWP CSWP - Certified Solidworks Professional Loft Sweep and Advanced Part Features 2
In SolidWorks, what does a 'Dome' feature do?