CPCS Safe Lifting Operations & LOLER 1

Question 1

What does LOLER stand for?

Accepted Answer

Lifting Operations and Lifting Equipment Regulations 1998

Answer

LOLER stands for Lifting Operations and Lifting Equipment Regulations 1998. It sets requirements for the safe use of lifting equipment and the planning and supervision of lifting operations.

Question 2

Under LOLER, who must plan a lifting operation?

Accepted Answer

A competent person must plan every lifting operation

Answer

LOLER requires that every lifting operation is planned by a competent person, with the plan covering the method, equipment, personnel, communication, and emergency arrangements.

Question 3

What is the Safe Working Load (SWL) of lifting equipment?

Accepted Answer

The maximum load the equipment is rated to lift safely under specified conditions

Answer

Safe Working Load (SWL) is the maximum load the equipment is designed and rated to lift safely under specified conditions. Exceeding SWL risks catastrophic failure of the equipment.

Question 4

Under LOLER, how often must a thorough examination of a crane or lifting accessory be carried out?

Accepted Answer

At least every 12 months for most lifting equipment, or every 6 months if used to lift persons

Answer

LOLER requires thorough examination of lifting equipment at least every 12 months (every 6 months if used to lift persons), or after exceptional circumstances such as damage or long periods out of use.

Question 5

What is the role of a banksman during a crane lifting operation?

Accepted Answer

To guide the crane operator using agreed signals when visibility is limited

Answer

A banksman guides the crane operator using agreed signals — hand or radio — particularly when the operator cannot see the load or landing area. They do not operate the crane or attach loads.

CPCS Theory Practice Test

CPCS Theory Practice Test

CPCS Safe Lifting Operations & LOLER 1