CPCS Lifting Operations (LOLER)

Question 1

What does LOLER 1998 stand for?

Accepted Answer

Lifting Operations and Lifting Equipment Regulations 1998

Answer

LOLER stands for the Lifting Operations and Lifting Equipment Regulations 1998. These regulations apply to all work equipment used for lifting and lowering loads, including cranes, telehandlers, hoists, and their associated lifting accessories such as slings and shackles.

Question 2

Under LOLER, what is required before every lifting operation takes place?

Accepted Answer

The operation must be properly planned by a competent person, appropriately supervised, and carried out safely

Answer

Regulation 8 of LOLER requires that every lifting operation is properly planned by a competent person, appropriately supervised, and carried out in a safe manner. The plan must address the risks and specify the equipment, personnel, and procedures to be used.

Question 3

How often must lifting equipment that is used for lifting persons be thoroughly examined under LOLER?

Accepted Answer

Every 6 months

Answer

Under LOLER Regulation 9, lifting equipment used for lifting persons must be thoroughly examined by a competent person at least every 6 months. This more frequent interval reflects the higher risk when people's lives depend directly on the equipment's integrity.

Question 4

What information must be marked on all lifting accessories (slings, shackles, etc.) under LOLER?

Accepted Answer

The safe working load (SWL) and any conditions of use

Answer

LOLER requires all lifting accessories to be clearly marked with their safe working load (SWL). Where the SWL depends on the configuration (e.g., sling angle), the relevant conditions must also be marked or available. This ensures users can verify the equipment is suitable for the load.

Question 5

What is a 'thorough examination' under LOLER, and who can carry it out?

Accepted Answer

A detailed examination by a competent person to detect defects and assess continued safe use

Answer

A thorough examination under LOLER is a detailed and systematic examination by a competent person (such as an insurance company engineer or independent inspection body) to detect any defects that could cause danger and to assess whether the equipment remains safe for continued use.

CPCS Theory Practice Test

CPCS Theory Practice Test

CPCS Lifting Operations (LOLER)