WALMART MAINTENANCE Safety and Compliance 4

Question 1

What does the acronym PPE stand for in a maintenance safety context?

Accepted Answer

Personal Protective Equipment

Answer

PPE stands for Personal Protective Equipment, which includes gloves, goggles, hard hats, and other gear that protects workers from hazards.

Question 2

A forklift has a rated capacity of 4,000 lbs. The load center is at 30 inches. If you move the load center to 36 inches, the actual capacity will:

Accepted Answer

Decrease

Answer

As load center distance increases, the effective lifting capacity decreases because the lever arm extends, reducing the forklift's stability and rated capacity.

Question 3

Which color is OSHA-compliant for marking physical hazards such as stumbling and tripping hazards on the floor?

Accepted Answer

Yellow

Answer

Yellow is the OSHA-standard color for marking caution and physical hazards including trip hazards, aisle edges, and equipment boundaries.

Question 4

When must a maintenance employee complete an incident report after a workplace injury?

Accepted Answer

As soon as possible, ideally the same day

Answer

Incident reports should be completed as soon as possible after an injury while details are fresh, typically the same day the incident occurs.

Question 5

A maintenance technician is about to work on a 480V electrical panel. Which minimum PPE is required?

Accepted Answer

Arc flash suit, face shield, and insulated gloves rated for the voltage

Answer

Work on 480V electrical panels requires arc-flash-rated PPE including an arc flash suit, face shield, and voltage-rated insulated gloves per NFPA 70E standards.

WALMART MAINTENANCE Practice Test

WALMART MAINTENANCE Practice Test

WALMART MAINTENANCE Safety and Compliance 4