UK PCV Theory Traffic Signs and Road Markings Questions and Answers

Question 1

You are driving a coach and see a circular sign with a red border and the number '50' inside. What does this sign mean?

Accepted Answer

Maximum speed limit is 50 mph.

Answer

In the UK, circular signs with a red border are prohibitive and give orders that must be obeyed. The number inside indicates the maximum speed limit in miles per hour.

Question 2

As a PCV driver on a 'Red Route' in London, you see double red lines at the side of the road. What is the rule regarding these markings?

Accepted Answer

Stopping is prohibited at any time, for any reason.

Answer

Double red lines on a Red Route indicate that no stopping is allowed at any time, 24 hours a day, 7 days a week. This prohibition applies to all vehicles, including buses, for activities like picking up/setting down passengers or loading/unloading.

Question 3

You are approaching a school entrance and see yellow zig-zag lines painted on the road. What action must you take during the times shown on the accompanying sign?

Accepted Answer

You must not stop or park on the markings, not even to pick up or set down passengers.

Answer

Yellow zig-zag lines outside a school, accompanied by an upright sign indicating times of operation, mean you must not stop or park on them for any reason, including picking up or setting down passengers. This is to ensure a clear line of sight for drivers and children.

Question 4

Which of the following best describes the meaning of a solid white line at the edge of a bus lane during its hours of operation?

Accepted Answer

You should not cross the line to enter the bus lane.

Answer

A solid white line marks the edge of a bus lane during its operational hours. Other traffic must not cross this line or drive in the lane unless otherwise indicated by signs or to avoid an accident. Dashed lines indicate where other vehicles may cross if necessary.

Question 5

You are driving your PCV and see a large, blue rectangular sign with white text and symbols. What type of information does this sign generally provide?

Accepted Answer

Directional or informational guidance, especially on motorways.

Answer

Rectangular signs are used to provide information. Specifically, blue rectangular signs are used for providing information and directions on motorways. Green signs are used for primary routes, and white for non-primary routes.

UK PCV Theory Practice Test

UK PCV Theory Practice Test

UK PCV Theory Traffic Signs and Road Markings Questions and Answers