← All Train Driver Flashcard Decks

Crew Communication and Protocols Flashcards

6 cards from real Train Driver practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.

Read the first 6 Crew Communication and Protocols flashcards as text
  1. What is 'positive communication' in railroad operations?

    Answer: Both parties must confirm understanding verbally before an action is taken

    Positive communication requires explicit two-way confirmation — the sender issues instructions and the receiver reads them back accurately before acting.

  2. What is a 'track warrant' in railroad operations?

    Answer: A written or verbal authority from a dispatcher granting a train the right to use a defined section of track

    A track warrant is the authority document used in non-signaled or DTC territory to grant trains the right to occupy specific track between defined limits.

  3. When must a train driver make a mandatory radio call to the dispatcher?

    Answer: When passing a designated reporting point, entering restricted territory, or encountering an emergency

    Mandatory radio reporting is required at designated control points, when entering restricted or work zones, or when any emergency or unusual condition is encountered.

  4. What does 'initiating an emergency' mean in PTC (Positive Train Control) terminology?

    Answer: The PTC system has automatically applied emergency brakes due to a safety condition

    In PTC context, 'initiating an emergency' refers to the PTC system automatically triggering an emergency brake application when a safety threshold is breached.

  5. What information must a train driver include when reporting a track defect to the dispatcher?

    Answer: Exact location by milepost, nature of the defect, and whether the train passed over it safely

    A track defect report must include the precise location, the nature and severity of the defect, and the train's status after passing the location.

  6. What is the engineer's responsibility when a 'proceed' signal is displayed?

    Answer: Proceed at the maximum authorized speed for that section of track

    A proceed (clear) signal authorizes the engineer to operate up to the maximum speed permitted by timetable or special instructions for that track.

Written and edited by , founder of Practice Test Geeks, with AI assistance. We have not yet matched this exam's facts to an official source, so confirm fees, dates and rules with the exam body. Editorial policy