โ† All Train Driver Flashcard Decks

Train Flashcards

7 cards from real Train Driver practice questions. Tap to flip, then mark Knew It or Still Learning โ€” missed cards come back until you master them.

Read the first 7 Train flashcards as text
  1. What is the recommended action if a fire is detected in a passenger car while running?

    Answer: Follow emergency procedures, ideally stopping at a location allowing safe evacuation

    Drivers are trained to stop where evacuation is safe, such as clear of tunnels and bridges, then follow fire procedures.

  2. What is the main reason for a speed restriction over points (switches) at a junction?

    Answer: To allow safe negotiation of the diverging route

    Diverging routes through points have lower speed limits because of the tighter geometry and ride forces.

  3. When a train is being prepared, why does the driver check the headlights and tail lights?

    Answer: To ensure the train is visible and correctly identified from both ends

    Correct head and tail lights make the train visible and confirm it is complete, which is vital for safety.

  4. What is 'coasting' in train driving technique?

    Answer: Allowing the train to run without power to save energy

    Coasting shuts off traction power and lets momentum carry the train, conserving energy where appropriate.

  5. If the emergency brake is applied automatically, what must the driver do before resuming?

    Answer: Identify the cause, report as required, and follow procedures before moving

    After an emergency brake application the driver must establish the cause and follow the correct procedure before proceeding.

  6. Why must a driver observe gradient signs along the route?

    Answer: To adjust power and braking for uphill and downhill sections

    Gradients affect how the train accelerates and brakes, so the driver adjusts control to maintain safe, smooth running.

  7. What is the correct response to a 'Stop and Examine' instruction from the signaller?

    Answer: Stop the train and inspect for the reported problem before proceeding under instruction

    A Stop and Examine requires the driver to halt and check the train or line for a reported defect before continuing as authorised.

Written and edited by , founder of Practice Test Geeks, with AI assistance. We have not yet matched this exam's facts to an official source, so confirm fees, dates and rules with the exam body. Editorial policy