← All Train Driver Flashcard Decks

Braking Systems and Train Dynamics Flashcards

7 cards from real Train Driver practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.

Read the first 7 Braking Systems and Train Dynamics flashcards as text
  1. What is the primary braking system used on freight trains in the United States?

    Answer: Pneumatic air brakes

    Pneumatic air brakes, standardized by George Westinghouse, use compressed air to actuate brake cylinders and are the standard system for US freight trains.

  2. What happens when brake pipe pressure drops to zero on a train equipped with standard air brakes?

    Answer: Emergency brakes apply automatically throughout the train

    A complete loss of brake pipe pressure triggers an emergency brake application because the system is fail-safe — brakes apply when air pressure is lost.

  3. What is 'dynamic braking' on a diesel-electric locomotive?

    Answer: Using traction motors as generators to create braking resistance

    Dynamic braking converts traction motors into generators, dissipating kinetic energy as heat through resistor grids to slow the train without using friction brakes.

  4. What is the standard charged brake pipe pressure for freight trains in the United States?

    Answer: 90 psi

    The standard brake pipe pressure for US freight trains is 90 psi when fully charged and brakes are released; passenger trains typically use 110 psi.

  5. What is a 'penalty brake application'?

    Answer: An automatic emergency brake activation triggered by a safety system

    A penalty brake application is an automatic emergency brake activation triggered by safety systems such as PTC, cab signal alerters, or overspeed detection.

  6. What does 'independent braking' control on a locomotive?

    Answer: Only the locomotive's brakes, without affecting the rest of the train

    The independent brake applies or releases only the locomotive's brakes without changing brake pipe pressure or affecting brake application on any of the train's cars.

  7. What does the automatic brake handle in a locomotive cab primarily control?

    Answer: Brake pipe pressure for the entire train

    The automatic brake handle regulates brake pipe pressure, which causes brakes to apply or release throughout the entire train automatically.

Written and edited by , founder of Practice Test Geeks, with AI assistance. We have not yet matched this exam's facts to an official source, so confirm fees, dates and rules with the exam body. Editorial policy