Steamfitter Documentation and Reporting 3

Question 1

Which form is used to document that a welder has met the qualification requirements of ASME Section IX?

Accepted Answer

WPQ (Welder Performance Qualification) record

Answer

The Welder Performance Qualification (WPQ) record documents that an individual welder has demonstrated the skill required by ASME Section IX.

Question 2

A pressure test is witnessed by an inspector and passes. Who must sign the test record to make it valid?

Accepted Answer

Both the test performer and the authorized inspector or engineer of record

Answer

A valid pressure test record requires signatures from both the person who conducted the test and the authorized inspector or engineer who witnessed and accepted it.

Question 3

What is the primary purpose of a Material Receiving Inspection Report on a steam piping project?

Accepted Answer

To verify delivered materials match the purchase order, specs, and are undamaged

Answer

A Material Receiving Inspection Report confirms that materials delivered to the job site match the specified grade, size, heat number, and are free of shipping damage.

Question 4

In piping system documentation, what is a 'piping and instrumentation diagram' (P&ID) used for?

Accepted Answer

Illustrating the process flow, equipment connections, instrumentation, and control logic

Answer

A P&ID shows the complete system including piping, equipment, instrumentation, valves, and control elements to represent how the system operates.

Question 5

When steam piping passes a radiographic examination, the RT film must be retained for a minimum period specified by code. What is that minimum period under ASME B31.1?

Accepted Answer

5 years

Answer

ASME B31.1 requires radiographic examination records and films to be retained for a minimum of 5 years after completion of the work.

(Steamfitter) Steamfitter Pipefitter Exam Practice Test

(Steamfitter) Steamfitter Pipefitter Exam Practice Test

Steamfitter Documentation and Reporting 3