Practice Test GeeksSPRAT - Society of Professional Rope Access Technicians Certification Practice Test
← All SPRAT Flashcard Decks

Safety and Compliance Flashcards

7 cards from real SPRAT practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.

Read the first 7 Safety and Compliance flashcards as text

  1. Which statement best describes SPRAT's two-rope system requirement?

    Answer: Each technician uses a working line and an independent safety (backup) line

    A separately anchored backup line protects the technician if the main working line or its anchors fail.

  2. Who should do the documented periodic inspections of rope access equipment?

    Answer: A competent person, following the manufacturer's instructions

    Besides each user's check before use, a competent person must carry out and record periodic inspections.

  3. A Level I technician is asked to rig anchors without supervision on a new job. What does SPRAT guidance say?

    Answer: Level I technicians should work under the supervision of a Level III

    Level I technicians work under the direct supervision of a Level III, who is responsible for the rigging and safety of the job.

  4. What hazard makes hot work such as welding or grinding especially dangerous for rope access?

    Answer: Heat and sparks can melt or damage synthetic ropes

    Synthetic ropes melt at relatively low temperatures, so hot work needs rope protection, fire watches, or alternative suspension.

  5. What is the best way to keep reliable communication between technicians on rope and the ground team?

    Answer: Set up and test a communication method such as radios or signals before work starts

    A communication method that has been agreed on and tested is needed for routine coordination and for emergencies.

  6. Under OSHA's general industry rule for rope descent systems (29 CFR 1910.27), what must building owners provide?

    Answer: Written certification that the anchorages have been identified, tested, certified, and maintained

    OSHA 1910.27 requires building owners to give written certification that anchorages for rope descent systems are identified, tested, certified, and maintained.

  7. Why should equipment from different manufacturers be checked for compatibility before use?

    Answer: Mismatched components can cause rollout, cross-loading, or improper function

    Components that don't work together can disengage or load incorrectly, so the competent person must confirm they function safely as a system.

How this page was made: written with AI tools and published by Nathan Beja, founder of Practice Test Geeks, who is responsible for its content. Exam facts are checked against the official sources listed below. Not reviewed by a subject-matter expert. Editorial policy

Sources & references

Exam facts on this page (fees, format, dates, passing scores) are checked against these official sources; the date is our last check. Editorial policy

  1. sprat.org — Test delivery, test dates, fees, renewal · verified Oct 2026
  2. sprrat.s3.amazonaws.com — Score validity, exam format, passing score, retake policy, score release, time limit · verified Oct 2026