← All SPRAT Flashcard Decks

Rescue and Emergency Procedures Flashcards

7 cards from real SPRAT practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.

Read the first 7 Rescue and Emergency Procedures flashcards as text
  1. According to SPRAT standards, what must be established before any rope access work begins on a project?

    Answer: A written rescue plan specific to the worksite

    SPRAT requires a site-specific written rescue plan to be in place before any rope access operations commence, ensuring the team can respond to emergencies systematically.

  2. In a counterbalance rescue technique, how does the rescuer reach the incapacitated technician?

    Answer: The rescuer descends on a separate rope connected through a top anchor while the casualty's rope acts as a counterweight

    In a counterbalance rescue, the rescuer descends on their own rope rigged through the top anchor, using their body weight to counterbalance and raise the casualty.

  3. What SPRAT certification level is required to serve as the on-site supervisor for every rope access project?

    Answer: Level 3

    SPRAT requires at least one Level 3 technician (rope access supervisor) to be present and responsible for supervising all rope access operations on any project site.

  4. What is the minimum number of rope access technicians SPRAT requires on any active rope access project?

    Answer: Two technicians (buddy system)

    SPRAT mandates a minimum of two rope access technicians (buddy system) on every project so that one can assist or rescue the other in an emergency.

  5. Suspension trauma (also called orthostatic intolerance) is a serious medical risk for incapacitated rope access workers because:

    Answer: Blood pools in the legs when hanging motionless in a harness, restricting return to the heart and brain

    Suspension trauma occurs when a motionless person hangs in a harness, causing venous pooling in the lower limbs that reduces cardiac return and can lead to unconsciousness or death.

  6. During a pick-off rescue, after a rescuer descends to an incapacitated casualty, what is the FIRST action the rescuer should take?

    Answer: Assess the casualty's condition and establish a connection between the rescuer's system and the casualty

    The rescuer must first assess the casualty and secure a connection between their rescue system and the casualty before taking any further action to ensure the casualty is controlled.

  7. What is the purpose of providing foot loops or stirrups to a conscious casualty suffering from suspension trauma while awaiting rescue?

    Answer: Allowing the casualty to stand and restore blood circulation to reduce shock symptoms

    Foot loops allow the conscious casualty to periodically stand and pump blood back from the legs, combating the venous pooling that causes suspension trauma.

How this page was made: written with AI tools and published by Nathan Beja, founder of Practice Test Geeks, who is responsible for its content. Exam facts are checked against the official sources listed below. Not reviewed by a subject-matter expert. Editorial policy

Sources & references

Exam facts on this page (fees, format, dates, passing scores) are checked against these official sources; the date is our last check. Editorial policy

  1. sprat.org — Test delivery, test dates, fees, renewal · verified Oct 2026
  2. sprrat.s3.amazonaws.com — Score validity, exam format, passing score, retake policy, score release, time limit · verified Oct 2026