Site Safe Hazard Identification and Risk Management 2

Question 1

In NZ construction, what is a 'toolbox talk' and what purpose does it serve?

Accepted Answer

A short, focused safety briefing on a specific topic conducted regularly on site to raise awareness and reinforce safe practices

Answer

A toolbox talk is a short (5-15 minute) safety briefing conducted regularly on NZ construction sites, focusing on a specific safety topic relevant to current work activities. It reinforces safe practices, communicates new hazards, and keeps safety top of mind.

Question 2

What is the NZ requirement for hazardous substance management on construction sites?

Accepted Answer

All hazardous substances must have current Safety Data Sheets (SDS) available, be properly stored, labelled, and workers must be trained in their safe use

Answer

NZ construction sites must maintain current SDS for all hazardous substances, store them according to HSNO Act requirements, ensure proper labelling, provide appropriate PPE, train workers in safe handling, and have emergency procedures for spills and exposure.

Question 3

What is a 'permit to work' system used for in NZ construction?

Accepted Answer

A formal written system that authorises specific workers to perform high-risk tasks under defined conditions and controls

Answer

A permit to work system is a formal written authorisation used for high-risk construction activities such as hot work, confined space entry, working at height, and working near live services. It specifies the task, hazards, controls, authorised personnel, and time limits.

Question 4

Under NZ Site Safe training, what is the 'take 5' or 'safety pause' concept?

Accepted Answer

Taking 5 minutes before starting a task to assess the immediate hazards, conditions, and your own readiness to work safely

Answer

The 'take 5' concept in NZ construction means pausing for a moment before starting any task to assess: what are the hazards, what could go wrong, what controls are needed, am I fit to do this work safely, and is the environment safe. It is a personal safety habit.

Question 5

What are the 'critical risks' in NZ construction that cause the most fatalities?

Accepted Answer

Falls from height, being struck by moving objects, vehicle and mobile plant incidents, electrocution, and collapse of structures or excavations

Answer

The critical risks (most common causes of fatalities and serious injuries) in NZ construction are: falls from height, being struck by falling or moving objects, vehicles and mobile plant incidents, electrocution, and collapse of structures, trenches, or excavations.

Site Safe Practice Test

Site Safe Practice Test

Site Safe Hazard Identification and Risk Management 2