RPC Radio Communications & Procedures 2

Question 1

When a remote pilot needs to obtain airport advisory information at an uncontrolled airport, which frequency should they monitor?

Accepted Answer

CTAF published in the Chart Supplement

Answer

121.5 MHz

Answer

122.8 MHz universally

Answer

Guard frequency 243.0 MHz

Question 2

A remote pilot operating near a Class D airport without radio communication capability must:

Accepted Answer

Remain clear of the Class D airspace

Answer

Obtain a waiver before operations

Answer

Operate only after sunset when traffic is minimal

Answer

Contact the tower via telephone for authorization before flight

Question 3

What does the term 'UNICOM' refer to in aviation radio communications?

Accepted Answer

A non-government air-ground communication station at uncontrolled airports

Answer

A universal emergency frequency monitored by ATC

Answer

A military UHF communication system

Answer

A satellite-based digital data link

Question 4

If ATC issues a 'traffic alert' to a manned aircraft in your vicinity while you are operating your UAS, what is your primary responsibility?

Accepted Answer

Yield right-of-way to the manned aircraft and take action to avoid collision

Answer

Immediately land your UAS

Answer

Ascend above 400 feet AGL to clear the traffic

Answer

Transmit on CTAF to alert the manned aircraft

Question 5

Which of the following best describes a 'Light Gun Signal' in the context of radio communications for sUAS?

Accepted Answer

A light signal from the control tower used when radio communication fails with manned aircraft

Answer

A laser pointer used to direct drone operators on the ground

Answer

A signal light on the drone used to indicate low battery

Answer

An LED strobe required on UAS for night operations

Question 6

When making a self-announce call on CTAF, what information must be included?

Accepted Answer

Aircraft type, position, altitude, and intentions

Answer

Pilot name, drone serial number, and battery level

Answer

Only the airport name and frequency in use

Answer

Drone model, weight, and operator's certificate number

Question 7

What is the purpose of reading back ATC clearances and instructions?

Accepted Answer

To confirm the pilot heard the instruction and ATC can verify accuracy

Answer

It is optional and only required for IFR operations

Answer

To practice standard phraseology as required by training regulations

Answer

To record the clearance for insurance purposes