Revit Core Architectural Modeling 2

Question 1

In Revit, which tool allows you to create a sloped floor by manipulating sub-element points?

Accepted Answer

Modify Sub Elements

Answer

The Modify Sub Elements tool on a floor's edit mode lets you drag individual points or edges to create sloped or sculpted floor surfaces.

Question 2

What Revit family category should a door family be assigned to ensure it cuts a host wall automatically?

Accepted Answer

Doors

Answer

Families assigned to the Doors category inherit built-in hosting behavior that automatically cuts an opening in the host wall.

Question 3

Which view type in Revit is most appropriate for showing a horizontal cut through a building at a specified height?

Accepted Answer

Floor Plan view

Answer

A Floor Plan view is a horizontal cut through the model at a defined cut plane height, typically 4 feet above the floor level.

Question 4

When you join two walls in Revit, what is the primary geometric result?

Accepted Answer

The intersection is cleaned up to remove overlapping geometry

Answer

Joining walls cleans the intersection graphic so materials don't overlap and the display shows a proper corner condition.

Question 5

In Revit architecture, what does the 'Room Separation Line' element do?

Accepted Answer

Defines a boundary that subdivides a space enclosed by walls into separate rooms

Answer

Room Separation Lines are model lines that act as virtual boundaries, allowing Revit to recognize distinct rooms in an otherwise open area.

Revit Practice Test