Revit Core Architectural Modeling 2 — Questions and Answers
Question 1: In Revit, which tool allows you to create a sloped floor by manipulating sub-element points?
- Shape Editing
- Floor Slope Arrow
- Modify Sub Elements (Correct answer)
- Split Element
Correct answer: Modify Sub Elements
The Modify Sub Elements tool on a floor's edit mode lets you drag individual points or edges to create sloped or sculpted floor surfaces.
Question 2: What Revit family category should a door family be assigned to ensure it cuts a host wall automatically?
- Generic Models
- Doors (Correct answer)
- Specialty Equipment
- Casework
Correct answer: Doors
Families assigned to the Doors category inherit built-in hosting behavior that automatically cuts an opening in the host wall.
Question 3: Which view type in Revit is most appropriate for showing a horizontal cut through a building at a specified height?
- Section view
- Elevation view
- Floor Plan view (Correct answer)
- 3D view
Correct answer: Floor Plan view
A Floor Plan view is a horizontal cut through the model at a defined cut plane height, typically 4 feet above the floor level.
Question 4: When you join two walls in Revit, what is the primary geometric result?
- The walls merge into a single element
- The intersection is cleaned up to remove overlapping geometry (Correct answer)
- A new hosted element is inserted at the junction
- The walls are locked together and cannot be moved independently
Correct answer: The intersection is cleaned up to remove overlapping geometry
Joining walls cleans the intersection graphic so materials don't overlap and the display shows a proper corner condition.
Question 5: In Revit architecture, what does the 'Room Separation Line' element do?
- Separates two rooms visually in plan view only
- Defines a boundary that subdivides a space enclosed by walls into separate rooms (Correct answer)
- Marks the boundary between interior and exterior spaces
- Creates a hatch pattern boundary in floor plans
Correct answer: Defines a boundary that subdivides a space enclosed by walls into separate rooms
Room Separation Lines are model lines that act as virtual boundaries, allowing Revit to recognize distinct rooms in an otherwise open area.
Question 6: Which Revit parameter type stores a value that is calculated from a formula based on other parameters?
- Shared Parameter
- Instance Parameter
- Reporting Parameter (Correct answer)
- Formula-driven Parameter
Correct answer: Reporting Parameter
A Reporting Parameter reads a geometric constraint value from the model and reports it as a read-only parameter that can feed into formulas.
Question 7: What happens when you set a wall's Base Constraint to 'Level 1' and its Top Constraint to 'Unconnected' with a height of 10 feet?
- The wall extends from Level 1 to Level 2 regardless of the level heights
- The wall rises exactly 10 feet from Level 1 regardless of other levels (Correct answer)
- The wall snaps to the nearest level above Level 1
- The wall height is locked and cannot be modified
Correct answer: The wall rises exactly 10 feet from Level 1 regardless of other levels
An Unconnected Height defines an absolute height for the wall measured from its Base Constraint level, independent of any upper level.
Revit Core Architectural Modeling 2
In Revit, which tool allows you to create a sloped floor by manipulating sub-element points?