PLC Study Guide 2026

Everything you need to pass the PLC exam in one place: the exam format, every topic to study, real practice questions with explanations, flashcards, and full-length practice tests. Free, no sign-up needed.

📋 PLC Exam Format at a Glance

175
Questions
240 min
Time Limit
70%
Passing Score

📚 PLC Topics to Study (21)

✍️ Sample PLC Questions & Answers

1. What is the MOST important consideration when implementing system architecture & design solutions in Programmable Logic Controller?
Alignment with organizational needs and scalability requirements

Technology solutions must align with organizational needs and scale appropriately to deliver value both now and in the future.

2. According to PLCopen motion control standards, which function block commands an axis to move to a specified absolute position?
MC_MoveAbsolute

MC_MoveAbsolute is the PLCopen-standard function block that commands an axis to travel to a specified absolute coordinate at a defined velocity and acceleration.

3. Which competency is MOST essential for professionals working in implementation & configuration in Programmable Logic Controller?
Critical thinking combined with practical application of knowledge

Critical thinking allows professionals to apply knowledge effectively in varied situations, leading to better outcomes than rote procedures.

4. Which safety architecture uses two independent channels where both must detect a fault to initiate a trip (voting logic)?
2oo2 (two-out-of-two)

A 2oo2 architecture requires both channels to agree that a fault exists before a trip is initiated, offering high availability but lower fault detection.

5. What is the PRIMARY benefit of continuous improvement in project planning & deployment for Programmable Logic Controller?
Enhanced efficiency, quality, and competitive advantage over time

Continuous improvement systematically enhances efficiency and quality, leading to sustained competitive advantage.

6. In a PLC network, what is the purpose of a DMZ (demilitarized zone) between the control network and the enterprise network?
To isolate the OT control network from the IT enterprise network while allowing controlled data sharing through the DMZ

A DMZ sits between the OT and IT networks with firewalls on both sides, allowing data historians and reporting servers to share data without giving IT direct access to PLCs.

🎯 Free PLC Practice Tests

📖 PLC Guides & Articles

Your PLC Study Path
1. Learn with Flashcards → 2. Drill Practice Tests → 3. Take the Full Exam Simulation
PLC Study Guide 2026 — Exam Format, Topics & Practice Questions