Safety Trained Supervisor Hazard Identification and Awareness Questions and Answers

Question 1

A supervisor is conducting a Job Hazard Analysis (JHA) for a routine task involving multiple steps. What is the PRIMARY goal of the first step in this process?

Accepted Answer

To break the job down into a sequence of distinct steps.

Answer

The first step of a Job Hazard Analysis (JHA), also known as a Job Safety Analysis (JSA), is to break the job into a sequence of steps. This provides a foundation for the subsequent steps, which are to identify potential hazards and then determine preventive measures for those hazards.

Question 2

Which of the following is considered the MOST effective type of hazard control measure according to the hierarchy of controls?

Accepted Answer

Physically removing the source of the hazard.

Answer

The hierarchy of controls ranks hazard control methods from most to least effective. Elimination, which is physically removing the hazard, is the most effective measure. Engineering controls (like machine guards), administrative controls, and PPE are progressively less effective and should be considered when elimination is not feasible.

Question 3

A construction site supervisor notices a new, unevaluated chemical has been brought onsite by a subcontractor. Which of the following is the most appropriate initial action for the supervisor to take to identify the hazards associated with this chemical?

Accepted Answer

Request and review the Safety Data Sheet (SDS) for the chemical.

Answer

The Safety Data Sheet (SDS) is the primary source of detailed information about a hazardous chemical. It provides information on identification, hazards, composition, first-aid measures, and handling and storage, which is essential for proper hazard identification and awareness.

Question 4

A supervisor tracks the number of safety observations, near-miss reports, and safety training sessions completed each month. These metrics are examples of what type of safety performance indicators?

Accepted Answer

Proactive Indicators

Answer

These are examples of proactive or leading indicators. Leading indicators are measures that are proactive in nature and track activities and conditions that can prevent incidents before they happen. Lagging indicators, in contrast, measure outcomes after an incident has occurred, such as injury rates or lost workdays.

Question 5

During a routine workplace inspection, a supervisor identifies an unguarded rotating shaft on a piece of machinery. This represents which category of hazard?

Accepted Answer

Safety Hazard

Answer

An unguarded rotating shaft is a classic example of a safety hazard. Safety hazards are conditions that can cause immediate physical harm, such as cuts, fractures, or amputations. Other examples include spills, tripping hazards, and working from heights.

Safety Trained Supervisor Practice Test

Safety Trained Supervisor Practice Test

Safety Trained Supervisor Hazard Identification and Awareness Questions and Answers