Safety Trained Supervisor Hazard Identification and Awareness Questions and Answers

Question 1

A supervisor is conducting a Job Hazard Analysis (JHA) for a routine task involving multiple steps. What is the PRIMARY goal of the first step in this process?

Accepted Answer

To break the job down into a sequence of distinct steps.

Answer

To determine the appropriate personal protective equipment (PPE).

Answer

To identify the potential hazards associated with each step.

Answer

To implement control measures for the identified risks.

Question 2

Which of the following is considered the MOST effective type of hazard control measure according to the hierarchy of controls?

Accepted Answer

Physically removing the source of the hazard.

Answer

Implementing a new administrative procedure.

Answer

Requiring the use of personal protective equipment (PPE).

Answer

Installing machine guards to isolate workers from the hazard.

Question 3

A construction site supervisor notices a new, unevaluated chemical has been brought onsite by a subcontractor. Which of the following is the most appropriate initial action for the supervisor to take to identify the hazards associated with this chemical?

Accepted Answer

Request and review the Safety Data Sheet (SDS) for the chemical.

Answer

Ask the subcontractor's employees if they have worked with it before.

Answer

Observe the chemical's physical properties and look for warning labels.

Answer

Assume it is hazardous and require full-body PPE for anyone nearby.

Question 4

A supervisor tracks the number of safety observations, near-miss reports, and safety training sessions completed each month. These metrics are examples of what type of safety performance indicators?

Accepted Answer

Proactive Indicators

Answer

Reactive Indicators

Answer

Lagging Indicators

Answer

Incident Rate Indicators

Question 5

During a routine workplace inspection, a supervisor identifies an unguarded rotating shaft on a piece of machinery. This represents which category of hazard?

Accepted Answer

Safety Hazard

Answer

Ergonomic Hazard

Answer

Chemical Hazard

Answer

Biological Hazard

Question 6

To effectively identify ergonomic hazards in an office setting, a supervisor should focus on which of the following?

Accepted Answer

The design of workstations and repetitive tasks.

Answer

The flammability of cleaning supplies.

Answer

The frequency of fire drills.

Answer

The adequacy of the emergency lighting.

A supervisor is conducting a Job Hazard Analysis (JHA) for a routine task involving multiple steps.What is the PRIMARY goal of the first step in this process?

A supervisor is conducting a Job Hazard Analysis (JHA) for a routine task involving multiple steps.
What is the PRIMARY goal of the first step in this process?