OSHA - Safety Certificate Lockout/Tagout Procedures Questions and Answers

Question 1

An 'affected employee' under the Lockout/Tagout standard becomes an 'authorized employee' when which of the following occurs?

Accepted Answer

Their duties are expanded to include servicing or maintaining the equipment.

Answer

According to OSHA 29 CFR 1910.147(b), an affected employee becomes an authorized employee when their duties are expanded to include performing servicing or maintenance on the machine or equipment that requires lockout or tagout.

Question 2

According to OSHA 29 CFR 1910.147, how often must an employer conduct and certify periodic inspections of their energy control procedures?

Accepted Answer

At least annually.

Answer

OSHA standard 1910.147(c)(6)(i) mandates that employers must conduct a periodic inspection of the energy control procedure at least annually to ensure that the procedure and the requirements of the standard are being followed.

Question 3

A maintenance worker is performing a minor tool change during normal production operations. This activity is routine, repetitive, and integral to production. Under which condition would this task be EXEMPT from full Lockout/Tagout procedures?

Accepted Answer

The work is performed using alternative measures that provide effective protection.

Answer

OSHA's LOTO standard includes an exception for minor tool changes and adjustments during normal production if they are routine, repetitive, and integral to production, provided that alternative measures are used which provide effective protection.

Question 4

During a periodic inspection of a tagout procedure, who must the inspector review the employee's responsibilities with?

Accepted Answer

Each authorized employee and each affected employee.

Answer

OSHA 1910.147(c)(6)(i)(D) specifies that when tagout is used, the periodic inspection must include a review between the inspector and each authorized AND affected employee. This is more stringent than for lockout-only inspections due to the nature of tags as warning devices.

Question 5

Which of the following is a mandatory step in the sequence for releasing equipment from Lockout/Tagout after servicing is complete?

Accepted Answer

Inspect the area to ensure nonessential items are removed and equipment is intact.

Answer

OSHA 1910.147(e) outlines the steps for release from LOTO. A key step before removing LOTO devices is to inspect the work area to ensure that nonessential items have been removed and that machine or equipment components are operationally intact.

OSHA Safety Certificate Practice Test

OSHA Safety Certificate Practice Test

OSHA - Safety Certificate Lockout/Tagout Procedures Questions and Answers