CogAT Paper Folding Analysis Questions and Answers

Question 1

A square piece of paper is folded in half vertically (left edge to right edge). Then, it is folded in half again horizontally (top edge to bottom edge). Finally, a single circular hole is punched through the center of the folded paper. How will the paper look when it is fully unfolded?

Accepted Answer

Four circles arranged in a square pattern in the center.

Answer

The paper is folded twice, creating four layers. Punching a hole through the center of the folded square means the hole goes through all four layers. When unfolded, each layer will reveal a hole, resulting in four holes arranged symmetrically around the center of the original square paper.

Question 2

Imagine a square piece of paper is folded along the diagonal from the top-right corner to the bottom-left corner. Then, a small triangular cut is made on the folded edge, near the top corner. Which of the following best describes the resulting shape when the paper is unfolded?

Accepted Answer

A square-shaped hole in the center of the paper.

Answer

Folding the paper diagonally creates two layers. A triangular cut on the folded edge removes a piece from both layers. When unfolded, the two triangular cuts will combine to form a larger, symmetrical shape. Since the cut is on the fold, the two triangles will form a square (or diamond) shape in the middle of the paper.

Question 3

A rectangular piece of paper is folded in half from bottom to top. A semi-circle is then cut out from the middle of the folded edge. What will the paper look like when unfolded?

Accepted Answer

A full circle in the center of the paper.

Answer

When the paper is folded, the cut is made along the fold line. A semi-circle cut along this fold will be mirrored when the paper is unfolded. The two semi-circles will join together to form a complete circle in the center of the original rectangle.

Question 4

A square piece of paper is folded in half horizontally. Then, a straight cut is made from the middle of the folded edge to the middle of the top, open edge. What is the result when the paper is unfolded?

Accepted Answer

A large triangular hole in the center.

Answer

The cut starts at the fold and goes to the opposite edge, effectively cutting a triangle out of the folded paper. Because the paper is folded, this removes a triangle from both the top and bottom halves. When unfolded, these two missing triangular sections combine to create a larger, diamond or triangular-shaped hole in the center of the square.

Question 5

Which of the following folding and cutting actions would result in a single, small square hole in the very center of a square piece of paper?

Accepted Answer

Fold the paper into quarters towards the center and punch one hole where the corners meet.

Answer

Folding the paper into quarters brings all four center points of the original paper together. Punching a single hole at this meeting point will place a hole in each of the four quadrants. When unfolded, these four holes will merge to form a single square hole in the exact center of the paper. Other methods create multiple holes or holes in different locations.

CogAT Practice Test

CogAT Practice Test

CogAT Paper Folding Analysis Questions and Answers