ORE Part 1 Dental Radiology 2

Question 1

Which radiographic technique is most appropriate for detecting proximal caries in posterior teeth?

Accepted Answer

Horizontal bitewing radiograph

Answer

Horizontal bitewing radiographs are the gold standard for detecting proximal (interproximal) caries in posterior teeth. They show the crowns of upper and lower teeth and the crestal bone level with minimal geometric distortion, making early enamel lesions visible that cannot be detected clinically.

Question 2

What is the most common cause of a radiopaque (white) artefact on a digital dental radiograph?

Accepted Answer

Metallic restoration or prosthesis

Answer

Metallic restorations (amalgam, crowns, posts) and prosthetic components are the most common cause of radiopaque artefacts on dental radiographs. They appear intensely white due to their high atomic number and density, which attenuates the X-ray beam almost completely.

Question 3

The paralleling technique for periapical radiography requires a minimum focus-to-film distance of:

Accepted Answer

30 cm

Answer

The paralleling (long cone) technique requires a minimum focus-to-receptor distance of 30 cm (using a long cone/spacer) to produce near-parallel X-rays that minimise geometric distortion and magnification. Some systems use 40 cm for even better image geometry. The bisecting angle technique uses a shorter distance of 20 cm.

Question 4

Which structure appears as a radiolucent band across the roots of maxillary teeth on a DPT (OPG)?

Accepted Answer

Air shadow of the oropharynx

Answer

The oropharyngeal airway creates a characteristic radiolucent (dark) band that is superimposed across the roots of the anterior teeth on a DPT. This is a normal anatomical shadow and should not be confused with pathology. Asking the patient to place their tongue against the palate during exposure helps reduce this artefact.

Question 5

A cone-cut error on a periapical radiograph appears as:

Accepted Answer

A clear unexposed area on part of the image

Answer

A cone-cut occurs when the X-ray beam does not fully cover the receptor, resulting in a clear (unexposed) area on part of the image. It is caused by misalignment between the beam and the sensor/film and is more common with rectangular collimation. Film holders with beam-aiming devices help prevent this error.

ORE Part 1 Practice Test

ORE Part 1 Practice Test

ORE Part 1 Dental Radiology 2