MNT Orthotic Devices and Nail Bracing 2

Question 1

The Onyfix nail correction system works by:

Accepted Answer

Applying a composite compound along the nail surface that hardens and uses the nail's own growth to correct curvature

Answer

Onyfix uses a UV-cured composite applied across the nail; as the nail grows, the brace's spring tension progressively flattens the nail curvature without invasive procedures.

Question 2

How often are most nail braces replaced or adjusted?

Accepted Answer

Every 4–8 weeks, coinciding with nail growth

Answer

Nail brace treatment cycles of 4–8 weeks align with toenail growth; regular re-assessment allows the clinician to evaluate correction progress and adjust tension.

Question 3

A custom-molded silicone orthosis for a clawed toe is designed to:

Accepted Answer

Provide cushioning for the tip of the toe and/or dorsal surface, preventing pressure ulceration

Answer

Clawed toes develop high-pressure points at the tip and dorsum; custom silicone orthoses protect these vulnerable areas from shoe friction and pressure.

Question 4

When applying a wire brace (e.g., VHO Goldstadt), the wire is anchored by:

Accepted Answer

Hooking into small notches or holes filed/drilled at the lateral nail edges

Answer

Wire braces anchor at the lateral nail edges via notches or holes; tension in the wire creates an outward spring force that corrects nail curvature.

Question 5

Patient education after nail brace placement should include:

Accepted Answer

Keeping the brace dry, avoiding swimming and prolonged water immersion, and returning if brace loosens

Answer

Water immersion weakens adhesive bonding; patients should be instructed to keep braces dry and report early loosening to prevent loss of corrective tension.

(MNT) Certified Medical Nail Technician Practice Test

(MNT) Certified Medical Nail Technician Practice Test

MNT Orthotic Devices and Nail Bracing 2