IST Workplace Safety and OSHA 1 — Questions and Answers
Question 1: According to OSHA standards, what color is used to identify physical hazards such as stumbling or striking dangers?
- Red
- Orange
- Yellow (Correct answer)
- Blue
Correct answer: Yellow
OSHA uses yellow to mark physical hazards like tripping, falling, and striking dangers.
Question 2: What does the acronym 'PPE' stand for in an industrial workplace?
- Personal Protective Equipment (Correct answer)
- Preventive Plant Evaluation
- Primary Process Efficiency
- Plant Protection Equipment
Correct answer: Personal Protective Equipment
PPE stands for Personal Protective Equipment, which includes items like gloves, helmets, and safety glasses.
Question 3: Which type of fire extinguisher is safe to use on electrical equipment fires?
- Class A
- Class B
- Class C (Correct answer)
- Class D
Correct answer: Class C
Class C extinguishers are designed for electrical fires because they use non-conductive agents.
Question 4: What is the minimum height at which fall protection is required in general industry under OSHA standards?
- 2 feet
- 4 feet (Correct answer)
- 6 feet
- 8 feet
Correct answer: 4 feet
OSHA requires fall protection in general industry when workers are exposed to falls of 4 feet or more.
Question 5: What does a red safety tag on a machine indicate?
- Machine is running normally
- Machine needs routine maintenance
- Machine is locked out / out of service (Correct answer)
- Machine has been recently inspected
Correct answer: Machine is locked out / out of service
A red tag indicates the machine is locked out or out of service and must not be operated.
Question 6: What is the primary purpose of a Lockout/Tagout (LOTO) procedure?
- To track machine maintenance schedules
- To prevent accidental energization of equipment during service (Correct answer)
- To secure inventory storage areas
- To document safety inspections
Correct answer: To prevent accidental energization of equipment during service
LOTO procedures prevent the accidental release of hazardous energy while equipment is being serviced or maintained.
IST Workplace Safety and OSHA 1
According to OSHA standards, what color is used to identify physical hazards such as stumbling or striking dangers?