Tool and Equipment Usage Flashcards

What does the term 'kerf' refer to when cutting material?

Answer: The width of material removed by a cutting tool

Kerf is the width of the slot cut by a saw blade or cutting tool — the material consumed in the cutting process.

What is the correct way to store cutting tools such as chisels and drill bits?

Answer: In a rack or roll where cutting edges are protected

Cutting tools should be stored in a rack, roll, or individual holders to protect their edges and prevent accidental injury.

When using a micrometer, what is the typical measuring resolution?

Answer: 0.001 inch

A standard outside micrometer measures to a resolution of 0.001 inch (one thousandth of an inch).

What is the primary function of a dial indicator in industrial work?

Answer: To measure small variations in position or surface runout

A dial indicator measures small amounts of movement or variation in position, commonly used for runout, alignment, and deflection checks.

What does the 'TPI' marking on a saw blade indicate?

Answer: Teeth Per Inch — the number of cutting teeth per inch of blade

TPI stands for Teeth Per Inch; higher TPI blades produce smoother cuts, while lower TPI blades cut faster and remove more material.

Which type of pliers is specifically designed to hold, cut, and crimp wire?

Answer: Lineman's pliers

Lineman's pliers (electrician's pliers) are designed with a gripping area, cutting notch, and crimping capability for electrical wire work.