← All IST Flashcard Decks

Electrical and Electronic Knowledge Flashcards

6 cards from real IST practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.

Read the first 6 Electrical and Electronic Knowledge flashcards as text
  1. What does AC stand for in electrical systems?

    Answer: Alternating Current

    AC stands for Alternating Current, which periodically reverses direction, unlike Direct Current (DC).

  2. What is the standard frequency of AC power in the United States?

    Answer: 60 Hz

    The US power grid operates at 60 Hz, meaning the current alternates direction 60 times per second.

  3. What is the function of a transformer in an electrical system?

    Answer: Change voltage levels from one level to another

    Transformers step AC voltage up or down to different levels using electromagnetic induction.

  4. A motor nameplate shows 480V/3-phase. What does '3-phase' indicate?

    Answer: The motor uses three separate AC waveforms offset by 120 degrees

    Three-phase power uses three AC waveforms that are each offset by 120 degrees, providing more efficient power delivery for industrial motors.

  5. If two 10-Ohm resistors are connected in parallel, what is the total resistance?

    Answer: 5 Ohms

    For two equal resistors in parallel, total resistance = R/2 = 10/2 = 5 Ohms.

  6. What instrument is used to measure electrical voltage?

    Answer: Voltmeter

    A voltmeter measures the electrical potential difference (voltage) between two points in a circuit.

How this page was made: written with AI tools and published by Nathan Beja, founder of Practice Test Geeks, who is responsible for its content. Exam facts are checked against the official sources listed below. Not reviewed by a subject-matter expert. Editorial policy

Sources & references

Exam facts on this page (fees, format, dates, passing scores) are checked against these official sources; the date is our last check. Editorial policy

  1. pge.com — Eligibility, exam format, time limit, test delivery, retake policy, test dates, exam information · verified Oct 2026