HUD Energy Efficiency and Weatherization Standards 1

Question 1

What federal program provides grants to states and local agencies to improve the energy efficiency of low-income households?

Accepted Answer

Weatherization Assistance Program (WAP)

Answer

The Weatherization Assistance Program (WAP), administered by the U.S. Department of Energy, funds energy efficiency improvements for low-income households.

Question 2

Which insulation R-value is typically required by HUD for attic insulation in most climate zones to meet current energy standards?

Accepted Answer

R-38 or higher

Answer

HUD and modern energy codes generally require R-38 or higher for attic insulation in most U.S. climate zones to achieve adequate thermal performance.

Question 3

During a HUD energy inspection, what does a 'blower door test' measure?

Accepted Answer

Air infiltration and building envelope leakage

Answer

A blower door test depressurizes the building to measure air infiltration rates, identifying leaks in the building envelope that reduce energy efficiency.

Question 4

What is the minimum window U-factor typically required for HUD-assisted new construction in a cold climate zone?

Accepted Answer

0.35

Answer

HUD energy standards aligned with IECC require window U-factors of 0.35 or lower in cold climate zones to limit heat loss through glazing.

Question 5

Which document provides the primary energy efficiency guidelines that HUD-assisted new construction projects must comply with?

Accepted Answer

International Energy Conservation Code (IECC)

Answer

HUD requires that new construction and substantial rehabilitation projects comply with the International Energy Conservation Code (IECC) as the baseline energy standard.

(HUD) Certified Housing and Urban Development Inspector Practice Test

(HUD) Certified Housing and Urban Development Inspector Practice Test

HUD Energy Efficiency and Weatherization Standards 1