HUD HUD Manufactured Housing Standards 1 — Questions and Answers
Question 1: What federal act established the construction and safety standards for manufactured housing?
- National Housing Act
- Manufactured Housing Construction and Safety Standards Act of 1974 (Correct answer)
- Fair Housing Act
- Housing and Community Development Act
Correct answer: Manufactured Housing Construction and Safety Standards Act of 1974
The Manufactured Housing Construction and Safety Standards Act of 1974 gave HUD authority to set federal standards for manufactured homes.
Question 2: Which label affixed to a HUD-code manufactured home indicates it meets federal construction standards?
- Energy Star label
- HUD Certification Label (red label) (Correct answer)
- Building permit sticker
- State inspection seal
Correct answer: HUD Certification Label (red label)
The HUD Certification Label, commonly called the red label, is permanently attached to each transportable section of a compliant manufactured home.
Question 3: What is the minimum required ceiling height in the main living areas of a HUD-code manufactured home?
- 6 feet 6 inches
- 7 feet (Correct answer)
- 7 feet 6 inches
- 8 feet
Correct answer: 7 feet
HUD standards require at least a 7-foot ceiling height throughout the main living areas of a manufactured home.
Question 4: A HUD Data Plate must be permanently affixed inside a manufactured home and includes all of the following EXCEPT:
- Wind zone designation
- Roof load zone
- Owner's name and contact info (Correct answer)
- Thermal zone designation
Correct answer: Owner's name and contact info
The Data Plate includes design specifications such as wind zone, roof load, and thermal zone, but does not contain owner personal information.
Question 5: Under HUD standards, what is the maximum allowable deflection for floors in a manufactured home under design live load?
- L/180
- L/240 (Correct answer)
- L/360
- L/480
Correct answer: L/240
HUD standards require that floor systems deflect no more than L/240 of the span length under the design live load.
Question 6: Which wind zone classification under HUD standards applies to coastal areas of Florida and the Gulf Coast most exposed to hurricane-force winds?
- Wind Zone I
- Wind Zone II
- Wind Zone III (Correct answer)
- Wind Zone IV
Correct answer: Wind Zone III
Wind Zone III covers the most wind-exposed coastal areas including much of the Florida coast and Gulf Coast, requiring the highest wind-resistance construction standards.
HUD HUD Manufactured Housing Standards 1
What federal act established the construction and safety standards for manufactured housing?