G60 Basic Codes & Regulations 2

Question 1

Under NYC fire code, a G60 certificate holder must notify the FDNY before conducting torch operations in a building that is:

Accepted Answer

Occupied by residents

Answer

An open-air parking lot

Answer

A vacant lot with no structures

Answer

A one-story detached garage

Question 2

Which NFPA standard most directly governs the storage and handling of flammable gases used with torches?

Accepted Answer

NFPA 58

Answer

NFPA 13

Answer

NFPA 72

Answer

NFPA 101

Question 3

A G60 certificate holder discovers that a gas cylinder valve is leaking. The correct first action is to:

Accepted Answer

Move the cylinder outdoors and contact the supplier

Answer

Light the leaking gas to burn it off safely

Answer

Wrap the valve in tape and continue working

Answer

Submerge the cylinder in water to stop the leak

Question 4

NYC Building Code requires that hot work permits be retained on site for a minimum of:

Accepted Answer

Three years

Answer

Six months

Answer

One year

Answer

30 days

Question 5

Which agency has primary jurisdiction over workplace safety violations related to torch use of flammable gases in New York City?

Accepted Answer

NYC Department of Buildings (DOB)

Answer

NYC Department of Sanitation

Answer

NYC Department of Transportation

Answer

NYC Department of Consumer Affairs

Question 6

Under OSHA 29 CFR 1926.350, which condition requires that gas cylinders be secured at all times?

Accepted Answer

Whenever they are stored or transported

Answer

Only when they are connected to a torch

Answer

Only when they are full

Answer

Only in buildings with more than three floors

Question 7

A G60 certificate of fitness is issued by:

Accepted Answer

The NYC Fire Department (FDNY)

Answer

The NYC Buildings Department (DOB)

Answer

OSHA regional office

Answer

The New York State Fire Marshal