FDNY G-60 Certificate of Fitness Exam — Questions and Answers

Question 1: What precaution should be taken when torch operations are conducted near freshly applied waterproofing membranes?

Use only electric heat tools near uncured membranes
Apply water to adjacent membranes during torch work
Allow membranes to fully cure and check for flammable off-gassing before torch use nearby (Correct answer)
Increase torch heat to cure the membrane faster

Correct answer: Allow membranes to fully cure and check for flammable off-gassing before torch use nearby

Freshly applied waterproofing membranes can off-gas flammable solvents, so they must fully cure before torch work is conducted in the vicinity.

Question 2: Under NYC Administrative Code, who bears legal responsibility if an unqualified worker performs torch operations that cause a fire?

The City of New York exclusively
Both the employer and the certificate holder may be liable (Correct answer)
Only the building owner
Only the insurance company

Correct answer: Both the employer and the certificate holder may be liable

Both the employer who assigned unqualified work and any supervising certificate holder can face liability and disciplinary action under NYC Administrative Code.

Question 3: What quality metrics are most important in Torch Operation?

Measurable outcomes, process compliance, and stakeholder satisfaction (Correct answer)
Only financial metrics
Only speed of completion
No metrics are needed

Correct answer: Measurable outcomes, process compliance, and stakeholder satisfaction

Quality in Torch Operation is measured through multiple dimensions including outcomes, processes, and satisfaction.

Question 4: When storing compressed gas cylinders, they must be secured in an upright position using what type of device?

Chain, strap, or bracket (Correct answer)
Adhesive tape
Rope or twine
Wooden wedges

Correct answer: Chain, strap, or bracket

Cylinders must be secured with chains, straps, or brackets to prevent them from falling and causing valve damage or injury.

Question 5: Which statement about the G60 Certificate of Fitness is correct regarding its use at multiple job sites?

A separate C of F must be obtained for each borough
A new C of F is needed for each new employer
The single C of F is valid at any location within FDNY jurisdiction in NYC (Correct answer)
The C of F is valid only at the address listed on the permit

Correct answer: The single C of F is valid at any location within FDNY jurisdiction in NYC

The G60 Certificate of Fitness is issued to the individual and is valid for torch operations at any location within FDNY's jurisdiction throughout New York City.

Question 6: What type of signage is required at the entrance to an area where flammable gas torch work is being performed?

Signs are only required in enclosed spaces, not open work areas
No signage is required for temporary torch operations
Only an equipment list for emergency responders
Warning signs prohibiting smoking and open flames, and identifying the hazard (Correct answer)

Correct answer: Warning signs prohibiting smoking and open flames, and identifying the hazard

The work area entrance must be marked with warning signs prohibiting smoking and identifying the flammable gas hazard to alert others before they enter.

Question 7: What environmental control is required before torch operations begin on a job site where other trades are working nearby?

Only verbal warning to nearby workers is sufficient
Torch work has priority and other trades must stop entirely
Other trades must work at reduced pace during torch operations
A physical barrier or hot work exclusion zone must be established around the torch area (Correct answer)

Correct answer: A physical barrier or hot work exclusion zone must be established around the torch area

A clearly defined exclusion zone with physical barriers must be established to protect other workers from flame, heat, and potential gas vapors.

Question 8: Which approach is most effective for problem-solving in Emergency Response?

Always asking someone else
Random trial and error
Systematic analysis followed by evidence-based decision making (Correct answer)
Ignoring the problem until it resolves itself

Correct answer: Systematic analysis followed by evidence-based decision making

Systematic, evidence-based approaches lead to more reliable solutions than ad hoc methods.

Question 9: How does technology impact modern practices in Torch Operation?

Technology replaces all human judgment
Technology is only useful for record keeping
Technology improves efficiency, accuracy, and access to information while requiring new skills (Correct answer)
Technology has no impact on this field

Correct answer: Technology improves efficiency, accuracy, and access to information while requiring new skills

Technology enhances capabilities while also requiring practitioners to develop new competencies.

Question 10: What is the primary purpose of a welding curtain or screen around a torch work area?

To improve lighting conditions for the operator
To prevent wind from affecting the torch flame
To protect bystanders from sparks, spatter, and UV/IR radiation (Correct answer)
To contain the gas cylinders securely

Correct answer: To protect bystanders from sparks, spatter, and UV/IR radiation

Welding curtains shield nearby workers and bystanders from flying sparks, molten spatter, and the harmful ultraviolet and infrared radiation produced by torch operations.

Question 11: What condition indicates a torch tip needs to be cleaned or replaced?

A steady blue cone flame
Normal operating temperature
A popping or uneven flame (Correct answer)
Clear gas flow from the orifice

Correct answer: A popping or uneven flame

A popping, irregular, or uneven flame is a sign that the torch tip orifice is dirty or damaged and needs cleaning or replacement.

Question 12: According to FDNY fire code requirements, compressed gas cylinders used in torch operations must be secured:

At least 10 feet from the work area at all times
Upright and chained or strapped to a fixed object or cart (Correct answer)
Laid flat on the ground to prevent tipping
In a locked cage when not in immediate use only

Correct answer: Upright and chained or strapped to a fixed object or cart

Compressed gas cylinders must be stored and used in the upright position and secured with chains or straps to prevent falling, which could cause valve damage and a catastrophic release.

Question 13: A G60 certificate of fitness is issued by:

The NYC Fire Department (FDNY) (Correct answer)
OSHA regional office
The NYC Buildings Department (DOB)
The New York State Fire Marshal

Correct answer: The NYC Fire Department (FDNY)

The FDNY Bureau of Fire Prevention issues the G60 Certificate of Fitness for Torch Use of Flammable Gases.

Question 14: What quality metrics are most important in Gas Safety Fundamentals?

Only financial metrics
Measurable outcomes, process compliance, and stakeholder satisfaction (Correct answer)
Only speed of completion
No metrics are needed

Correct answer: Measurable outcomes, process compliance, and stakeholder satisfaction

Quality in Gas Safety Fundamentals is measured through multiple dimensions including outcomes, processes, and satisfaction.

Question 15: How should ethical dilemmas be handled in Fire Prevention?

Make decisions based solely on personal preference
Follow established ethical guidelines, consult with supervisors, and prioritize stakeholder welfare (Correct answer)
Always choose the cheapest option
Ignore ethical concerns

Correct answer: Follow established ethical guidelines, consult with supervisors, and prioritize stakeholder welfare

Ethical decision-making requires following professional guidelines and prioritizing the welfare of all stakeholders.

Question 16: What makes a professional competent in Emergency Response?

Only experience matters
Only certifications matter
A combination of education, practical experience, ongoing learning, and adherence to professional standards (Correct answer)
Only formal education matters

Correct answer: A combination of education, practical experience, ongoing learning, and adherence to professional standards

Competence requires the integration of knowledge, skills, experience, and professional conduct.

Question 17: How should acetylene cylinders always be stored and used?

Horizontally to prevent pressure loss
Inverted for better gas flow
At a 45-degree angle
In an upright vertical position (Correct answer)

Correct answer: In an upright vertical position

Acetylene cylinders must always be stored and used upright because they contain acetone liquid solvent; tilting can cause acetone to flow into the regulator and cause equipment damage or fire.

Question 18: Cylinder storage areas must be conspicuously posted with which type of warning sign?

'Hard Hat Required' signs
'Authorized Personnel Only' signs only
'Eye Protection Required' signs
'No Smoking — Flammable Gas' warning signs (Correct answer)

Correct answer: 'No Smoking — Flammable Gas' warning signs

'No Smoking' and flammable gas warning signs must be posted at cylinder storage areas to alert all personnel to the fire and explosion hazard.

Question 19: How should ethical dilemmas be handled in Emergency Response?

Follow established ethical guidelines, consult with supervisors, and prioritize stakeholder welfare (Correct answer)
Always choose the cheapest option
Make decisions based solely on personal preference
Ignore ethical concerns

Correct answer: Follow established ethical guidelines, consult with supervisors, and prioritize stakeholder welfare

Ethical decision-making requires following professional guidelines and prioritizing the welfare of all stakeholders.

Question 20: When should flashback arrestors be installed on a torch system?

Only at the torch end
Only at the cylinder regulator end
At both the torch and regulator ends of each hose (Correct answer)
They are optional if hoses are short

Correct answer: At both the torch and regulator ends of each hose

Flashback arrestors should be installed at both the torch end and the regulator end of each hose to provide maximum protection against flashback.

Question 21: What is the most important foundational concept in Fire Prevention?

Ignoring established guidelines
Understanding core principles and their practical application in Fire Prevention (Correct answer)
Only following instructions from supervisors
Memorizing all rules without understanding

Correct answer: Understanding core principles and their practical application in Fire Prevention

Core principles provide the foundation for all decision-making and practice in Fire Prevention.

Question 22: How should ethical dilemmas be handled in Torch Operation?

Always choose the cheapest option
Follow established ethical guidelines, consult with supervisors, and prioritize stakeholder welfare (Correct answer)
Ignore ethical concerns
Make decisions based solely on personal preference

Correct answer: Follow established ethical guidelines, consult with supervisors, and prioritize stakeholder welfare

Ethical decision-making requires following professional guidelines and prioritizing the welfare of all stakeholders.

Question 23: What is the most important foundational concept in Torch Operation?

Only following instructions from supervisors
Ignoring established guidelines
Memorizing all rules without understanding
Understanding core principles and their practical application in Torch Operation (Correct answer)

Correct answer: Understanding core principles and their practical application in Torch Operation

Core principles provide the foundation for all decision-making and practice in Torch Operation.

Question 24: What is the significance of documentation in Gas Safety Fundamentals?

It provides a record for accountability, quality assurance, and legal compliance (Correct answer)
Only management needs to document
Only required during audits
Documentation is unnecessary busy work

Correct answer: It provides a record for accountability, quality assurance, and legal compliance

Proper documentation supports accountability, enables quality review, and satisfies legal requirements.

Question 25: Which approach is most effective for problem-solving in Gas Safety Fundamentals?

Random trial and error
Systematic analysis followed by evidence-based decision making (Correct answer)
Ignoring the problem until it resolves itself
Always asking someone else

Correct answer: Systematic analysis followed by evidence-based decision making

Systematic, evidence-based approaches lead to more reliable solutions than ad hoc methods.

Question 26: What role does continuing education play in Gas Safety Fundamentals?

Only beneficial for management
Keeping practitioners current with evolving best practices and new developments (Correct answer)
It is optional and rarely helpful
Only required for new practitioners

Correct answer: Keeping practitioners current with evolving best practices and new developments

Continuing education ensures practitioners stay current with advances in their field.

Question 27: What is the primary purpose of standardized procedures in Gas Safety Fundamentals?

To ensure consistency, safety, and quality across all practitioners (Correct answer)
To benefit only management
To create unnecessary bureaucracy
To slow down work processes

Correct answer: To ensure consistency, safety, and quality across all practitioners

Standardized procedures ensure that all practitioners deliver consistent, safe, and high-quality outcomes.

Question 28: Which of the following conditions would automatically prohibit torch operations in a space, regardless of permit status?

Outdoor temperatures above 90°F
The presence of a sprinkler system
A flammable atmosphere or explosive concentration of vapors (Correct answer)
Work occurring after 3 PM

Correct answer: A flammable atmosphere or explosive concentration of vapors

No hot work, including torch operations, may be performed in a space where a flammable atmosphere or explosive vapor concentration exists, as ignition would be catastrophic.

Question 29: A city-wide permit is valid up to:

6 months
12 months
30 days (Correct answer)
3 months

Correct answer: 30 days

A city-wide permit, particularly for hot work or similar temporary operations, typically has a limited validity period to ensure regular oversight and adherence to safety standards. For the G60 Certificate of Fitness context, a city-wide permit is generally valid for a maximum of 30 days. This short duration allows authorities to frequently review and approve ongoing projects, ensuring that safety conditions are consistently met and updated as needed.

Question 30: What are the key regulatory requirements affecting Emergency Response?

Only federal regulations apply
Regulations are optional guidelines
Compliance with applicable laws, industry standards, and licensing requirements specific to the field (Correct answer)
There are no regulations

Correct answer: Compliance with applicable laws, industry standards, and licensing requirements specific to the field

Practitioners must comply with all applicable regulations, which may include federal, state, and industry-specific requirements.

Question 31: What is the importance of communication skills in Torch Operation?

Communication skills cannot be learned
Technical skills are sufficient without communication
Clear communication prevents errors, builds relationships, and ensures understanding among all parties (Correct answer)
Communication is only important for managers

Correct answer: Clear communication prevents errors, builds relationships, and ensures understanding among all parties

Effective communication is essential for coordination, error prevention, and stakeholder relationships.

Question 32: What are the key regulatory requirements affecting Fire Prevention?

Only federal regulations apply
Regulations are optional guidelines
Compliance with applicable laws, industry standards, and licensing requirements specific to the field (Correct answer)
There are no regulations

Correct answer: Compliance with applicable laws, industry standards, and licensing requirements specific to the field

Practitioners must comply with all applicable regulations, which may include federal, state, and industry-specific requirements.

Question 33: What shade of lens filter is typically required for torch brazing and light cutting operations?

Shade 8 to 9
Shade 10 to 12
Shade 1 to 2
Shade 3 to 5 (Correct answer)

Correct answer: Shade 3 to 5

OSHA and ANSI standards recommend shade 3 to 5 filter lenses for torch brazing and light gas cutting to protect eyes from infrared radiation and sparks.

Question 34: What must be done to combustible materials within 35 feet of a hot work area before torch operations begin?

They can remain if the fire watch is vigilant
Wet them with water to reduce flammability
Remove them or protect them with fire-resistant shields or blankets (Correct answer)
Simply note their location on the hot work permit

Correct answer: Remove them or protect them with fire-resistant shields or blankets

NFPA 51B and NYC fire code require that combustible materials within 35 feet of hot work be removed or protected with approved fire-resistant shields before operations begin.

Question 35: What is the primary purpose of standardized procedures in Fire Prevention?

To ensure consistency, safety, and quality across all practitioners (Correct answer)
To slow down work processes
To benefit only management
To create unnecessary bureaucracy

Correct answer: To ensure consistency, safety, and quality across all practitioners

Standardized procedures ensure that all practitioners deliver consistent, safe, and high-quality outcomes.

Question 36: What makes a professional competent in Fire Prevention?

A combination of education, practical experience, ongoing learning, and adherence to professional standards (Correct answer)
Only experience matters
Only certifications matter
Only formal education matters

Correct answer: A combination of education, practical experience, ongoing learning, and adherence to professional standards

Competence requires the integration of knowledge, skills, experience, and professional conduct.

FDNY G-60 Certificate of Fitness Exam

The FDNY G-60 Certificate of Fitness exam certifies individuals to use torches with flammable gases (oxygen, LPG, CNG) for hot work operations in New York City. The computer-based exam covers torch operation, gas safety, fire prevention, equipment inspection, emergency response, and FDNY regulations.

Questions

38 min

Time Limit

70%

To Pass

Checking for saved progress...

Exam Rules

You can skip questions and return to them later
Flag questions for review before submitting
No feedback shown until you submit the entire exam
Unanswered questions count as wrong — answer everything
10 pretest questions are mixed in and don't affect your score
Timer auto-submits when time runs out
Your progress is auto-saved every 30 seconds