HVAC - Heating, Ventilation, and Air Conditioning Practice Test

HVAC - Heating, Ventilation, and Air Conditioning Practice Test

 ▶
  • The EPA Section 608 Universal certification test has 100 questions: 25 Core plus 25 each from Type I, Type II and Type III. (ecfr.gov)
  • The passing score for the closed-book EPA Section 608 Type I, Type II, Type III and Universal tests is 70 percent, and mail-in Type I tests need 84 percent. (ecfr.gov)
  • EPA Section 608 Technician Certification credentials do not expire. (U.S. Environmental Protection Agency)
  • EPA Section 608 certification has no recertification requirement today, though EPA can add one later by publishing a notice in the Federal Register. (ecfr.gov)
  • EPA Section 608 Type II, Type III and Universal certification requires a closed-book, proctored test taken in a secure environment through an EPA-approved certifying program. (ecfr.gov)
  • Technicians who maintain, service, repair or dispose of equipment that could release refrigerants must hold EPA Section 608 certification, while closely supervised apprentices are exempt. (U.S. Environmental Protection Agency)
  • EPA-approved Section 608 certifying programs must give candidates their test results no later than 30 days after the test date. (ecfr.gov)

Facts verified Oct 20, 2026 against U.S. Environmental Protection Agency. Dates that have passed are removed automatically.

HVAC Exam at a Glance

ItemDetailOfficial source
Number of questions (Universal)100 questionsecfr.gov
Passing score70% (closed-book); 84% for mail-in Type Iecfr.gov
ValidityDoes not expireU.S. Environmental Protection Agency
RenewalNo recertification currently requiredecfr.gov
DeliveryClosed-book, proctored test through an EPA-approved certifying program (mail-in allowed for Type I only)ecfr.gov
EligibilityRequired for technicians who service or dispose of refrigerant-containing equipment; supervised apprentices exemptU.S. Environmental Protection Agency
Score releaseWithin 30 days of the testecfr.gov

Facts verified Oct 20, 2026 against U.S. Environmental Protection Agency. Dates that have passed are removed automatically. Practice with the free HVAC - Heating, Ventilation, and Air Conditioning practice test on PracticeTestGeeks (450+ questions with answer explanations).

Sample HVAC - Heating, Ventilation, and Air Conditioning Practice Questions

Try these questions from our free HVAC - Heating, Ventilation, and Air Conditioning practice tests. The correct answer and an explanation follow each question.

  1. Which component in a ductless mini-split system is responsible for reversing refrigerant flow to switch between heating and cooling modes?

    • A. Expansion valve
    • B. Reversing valve
    • C. Check valve
    • D. Solenoid valve

    Answer: B. Reversing valve

    The reversing (or four-way) valve redirects refrigerant flow to switch the system between heating and cooling operation.

  2. Which commercial HVAC system component is responsible for distributing conditioned air to specific zones based on thermostat demand?

    • A. Air handling unit (AHU)
    • B. VAV terminal box
    • C. Chilled water pump
    • D. Cooling tower fan

    Answer: B. VAV terminal box

    VAV terminal boxes modulate airflow to individual zones in response to zone thermostat signals, providing precise temperature control.

  3. In a variable air volume (VAV) air handler system, what component modulates airflow to different zones?

    • A. Zone dampers controlled by a central DDC controller
    • B. Multiple blower motors with different speeds
    • C. Multiple evaporator coils in parallel
    • D. A variable TXV that adjusts refrigerant flow

    Answer: A. Zone dampers controlled by a central DDC controller

    VAV systems use motorized zone dampers controlled by a Direct Digital Control (DDC) system to modulate airflow to each zone based on its thermostat demand.

  4. What is the 'dual manifold' gauge technique for checking a system with two circuits (as in some commercial units)?

    • A. Using one gauge for high side and one for low side simultaneously on a single-circuit system
    • B. Connecting separate manifold gauge sets to each independent refrigerant circuit to compare pressures and diagnose imbalances
    • C. Using two refrigerant manifolds in parallel to speed up recovery
    • D. Measuring both R-410A and R-22 pressures simultaneously

    Answer: B. Connecting separate manifold gauge sets to each independent refrigerant circuit to compare pressures and diagnose imbalances

    Some commercial units have two independent refrigerant circuits (two compressors, two coils). Using a separate gauge set on each circuit allows direct comparison of circuit pressures to identify if one circuit is underperforming, making multi-circuit diagnostics more efficient.

Take the full HVAC - Heating, Ventilation, and Air Conditioning practice test

Free HVAC - Heating, Ventilation, and Air Conditioning Study Tools

Interactive HVAC - Heating, Ventilation, and Air Conditioning resources on PracticeTestGeeks, free to start:

▶ Start Quiz